PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 95D26
95D26 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, thread_length: 0.510 INCHES MINIMUM IN, screw_material: STEEL, fastener_length: 0.750 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-214-0273, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
95D26
NSN: 5305-00-214-0273
FSC: 5305
CAGE: 0AHP5 — CURTISS-WRIGHT CONTROLS, INC. DIV ACTUATION DIVISION (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
thread_length0.510 INCHES MINIMUM IN
screw_materialSTEEL
fastener_length0.750 INCHES NOMINAL IN
hardness_rating26.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
countersink_angle90.0 DEGREES NOMINAL
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.250 INCHES IN
screw_surface_treatmentCADMIUM
NSN5305-00-214-0273
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 95D26 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.750 INCHES NOMINAL IN
•
THREAD SERIES DESIGNATOR: UNF
•
THREAD LENGTH: 0.510 INCHES MINIMUM IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
THREAD CLASS: 3A A
•
COUNTERSINK ANGLE: 90.0 DEGREES NOMINAL
•
SCREW MATERIAL: STEEL
•
HEAD STYLE: FLAT COUNTERSUNK
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH0.750 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNF
THREAD LENGTH0.510 INCHES MINIMUM IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD CLASS3A A
COUNTERSINK ANGLE90.0 DEGREES NOMINAL
SCREW MATERIALSTEEL
HEAD STYLEFLAT COUNTERSUNK
THREAD QUANTITY PER INCH28
THREAD DIRECTIONRIGHT-HAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
95026Interchangeable
interchangeable cross-reference
interchangeable
48Interchangeable
interchangeable cross-reference
interchangeable
HS6158-0002Interchangeable
interchangeable cross-reference
interchangeable
8030403D00Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 95D26?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 95D26?
95D26 is a SCREW,MACHINE.
What parts can replace 95D26?
There are 4 known substitutes for 95D26: 95026, 48, HS6158-0002 and 1 more. Substitute compatibility should be verified for your specific system.
Is 95D26 still available?
95D26 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 95D26

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026