PartsTable
Technical Data Sheet
PartsTable / MRO / 9595
9595 ✓ Verified by PartsTable
Thule · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The most safe and silent roof rack. Now in low fit.<br><br>- Low profile and close fit to the roof creates a stunning look.<br>- Smoothly arched for a slim fit.<br>- Universal fit by the use of telescopic feet (50 mm/side).<br>- Pre-assembled and complete packed for easy handling.<br>- Using airplane technology to minimize sound and fuel consumption.<br>- WindDiffuser diverts the air currents.<br>- Trail Edge for reduced air resistance.<br>- Double molded plastic caps for best appearance and easy fitting.<br>- A kit-based roof rack system. Use the Thule Buyer's Guide to find out which roof rack fits your car.<br>- City Crash approved for 75 kg according to ISO Norm.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-006-8382, indicating validated use in U.S. government and defense logistics supply chains.

WHERE IT FITS
MRO→ MRO_GENERAL→ 9595
NSN: 5330-00-006-8382
FSC: 5330
CAGE: 59462 — TEMPLETON KENLY AND CO INC (USA)
SPECIFICATIONS
Part Number9595
ManufacturerThule
NSN5330-00-006-8382
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9595 MFR: Thule ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 0.558 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
OUTSIDE DIAMETER0.558 INCHES NOMINAL IN
END ITEM IDENTIFICATIONHYDRAULIC PUMP KENLY CO MODEL TT10,-25,-50
MATERIALRUBBER SYNTHETIC OVERALL
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
109Interchangeable
interchangeable cross-reference
interchangeable
BR15352Interchangeable
interchangeable cross-reference
interchangeable
SMB209388-1Interchangeable
interchangeable cross-reference
interchangeable
40586000269Interchangeable
interchangeable cross-reference
interchangeable
Z-126Interchangeable
interchangeable cross-reference
interchangeable
1114GInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9595?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9595?
9595 is a CONNECTOR,RECEPTACLE,ELECTRICAL manufactured by Thule. It is classified as a MRO (MRO_GENERAL).
What parts can replace 9595?
There are 15 known substitutes for 9595: 109, BR15352, SMB209388-1 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9595?
9595 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-006-8382. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
Loading comments...
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9595

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026