PartsTable
Technical Data Sheet
9579 ✓ Verified by PartsTable
· MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Stranded for flexible routing, solid for conduit THHN/THWN dual-rated — check both tables
Ampacity depends on installation method
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include material: RUBBER SYNTHETIC, conductor_form: SOLID ALL CONDUCTORS, center_hole_diameter: 6.211 INCHES MINIMUM AND 6.257 INCHES MAXIMUM IN, fsc_application_data: AIRCRAFT MAINTENANCE AND REPAIR SHOP SPECIALIZED EQUIPMENT, round_conductor_size: 16 AWG ALL CONDUCTORS, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 6145-01-308-2230, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL 9579
NSN: 6145-01-308-2230
FSC: 6145
CAGE: 16428 — BELDEN WIRE & CABLE COMPANY LLC DBA BELDEN CDT ELECTRONICS DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
conductor_formSOLID ALL CONDUCTORS
special_featuresCONDUCTORS COLORED CODED BLACK, RED, YELLOW, AND LIGHT BLUE AND PVC INSULATORS; RED PVC JACKET; 0.301 IN. OVERALL DIAMETER IN
conductor_quantity4
center_hole_diameter6.211 INCHES MINIMUM AND 6.257 INCHES MAXIMUM IN
fsc_application_dataAIRCRAFT MAINTENANCE AND REPAIR SHOP SPECIALIZED EQUIPMENT
round_conductor_size16 AWG ALL CONDUCTORS
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
strand_awg_size_per_conductor36 ALL CONDUCTORS
strand_quantity_per_conductor19 ALL CONDUCTORS
NSN6145-01-308-2230
COMPONENT DIAGRAM
WIRE / CABLE — AMPACITY DEPENDS ON INSTALLATION CROSS-SECTION JACKET WIRE SPECIFICATIONS Conductor Size: — Conductor Count: — Voltage Rating: — Insulation: — Temp Rating: — PN: 9579 · OEM ⚠ VERIFY BEFORE ORDERING Ampacity depends on installation method — conduit ≠ free air ≠ underground. Same wire, different ratings. AWG sizing is inverse — smaller number = thicker wire (4 AWG > 12 AWG) ✓ BROKER TIP Stranded = flexible routing and vibration resistance. Solid = fixed conduit runs only. THHN/THWN = dual rated — check both dry and wet ampacity tables PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
ROUND CONDUCTOR SIZE: 16 AWG ALL CONDUCTORS
STRAND AWG SIZE PER CONDUCTOR: 36 ALL CONDUCTORS
CONDUCTOR FORM: SOLID ALL CONDUCTORS
CONDUCTOR QUANTITY: 4
STRAND QUANTITY PER CONDUCTOR: 19 ALL CONDUCTORS
TECHNICAL CHARACTERISTICS (FLIS)
ROUND CONDUCTOR SIZE16 AWG ALL CONDUCTORS
SPECIAL FEATURESCONDUCTORS COLORED CODED BLACK, RED, YELLOW, AND LIGHT BLUE AND PVC INSULATORS; RED PVC JACKET; 0.301 IN. OVERALL DIAMETER IN
STRAND AWG SIZE PER CONDUCTOR36 ALL CONDUCTORS
CONDUCTOR FORMSOLID ALL CONDUCTORS
CONDUCTOR QUANTITY4
STRAND QUANTITY PER CONDUCTOR19 ALL CONDUCTORS
ROUND CONDUCTOR SIZE16 AWG ALL CONDUCTORS
SPECIAL FEATURESCONDUCTORS COLORED CODED BLACK, RED, YELLOW, AND LIGHT BLUE AND PVC INSULATORS; RED PVC JACKET; 0.301 IN. OVERALL DIAMETER IN
STRAND AWG SIZE PER CONDUCTOR36 ALL CONDUCTORS
CONDUCTOR FORMSOLID ALL CONDUCTORS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
9579Interchangeable
interchangeable cross-reference
interchangeable
TEX-FLUFF W/BAC-STAT 400Interchangeable
interchangeable cross-reference
interchangeable
1960932-1Interchangeable
interchangeable cross-reference
interchangeable
806000Interchangeable
interchangeable cross-reference
interchangeable
915769Interchangeable
interchangeable cross-reference
interchangeable
23410-01Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9579?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9579?
9579 is a RESISTOR,VARIABLE,WIRE WOUND,PRE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 9579?
There are 11 known substitutes for 9579: 9579, TEX-FLUFF W/BAC-STAT 400, 1960932-1 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9579?
9579 is cataloged in the Federal Logistics Information System (FLIS) under NSN 6145-01-308-2230. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9579