PartsTable
Technical Data Sheet
Download PDF

95787 — PACKING,PREFORMED

✓ Government record, cited
Hama · ORING SEAL
PRODUCT OVERVIEW

95787: PACKING,PREFORMED.

- Original aha: memory card case for up to 4 memory cards (all sizes). - Equipment: - Universal mesh compartments. - With hook and loop fastener.

- Dimensions: W: 8.0 x D: 11.5 x H: 1.0 cm. - Capacity: max. 4 Card.

- Model: Bag. This part is cataloged in the U.S. Government catalog under NSN 5330-00-324-7160, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
95787
NSN: 5330-00-324-7160
FSC: 5330 — Packing and Gasket Materials
CAGE: 14541 — COOPER MACHINERY SERVICES LLC (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC OVERALL
hardness_rating55.0 SHORE DUROMETER A MINIMUM AND 60.0 SHORE DUROMETER A MAXIMUM OVERALL
peripheral_diameter1.338 INCHES MINIMUM AND 1.350 INCHES MAXIMUM IN
center_hole_diameter0.893 INCHES MINIMUM AND 0.905 INCHES MAXIMUM IN
cross-sectional_height0.324 INCHES MINIMUM AND 0.336 INCHES MAXIMUM IN
cross-sectional_shape_styleD
NSN5330-00-324-7160
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 95787 MFR: Hama ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.324 INCHES MINIMUM AND 0.336 INCHES MAXIMUM IN
•
HARDNESS RATING: 55.0 SHORE DUROMETER A MINIMUM AND 60.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: D
•
PERIPHERAL DIAMETER: 1.338 INCHES MINIMUM AND 1.350 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.893 INCHES MINIMUM AND 0.905 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.324 INCHES MINIMUM AND 0.336 INCHES MAXIMUM IN
HARDNESS RATING55.0 SHORE DUROMETER A MINIMUM AND 60.0 SHORE DUROMETER A MAXIMUM OVERALL
CROSS-SECTIONAL SHAPE STYLED
PERIPHERAL DIAMETER1.338 INCHES MINIMUM AND 1.350 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.893 INCHES MINIMUM AND 0.905 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
94322-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 95787?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 95787?
95787 is a PACKING,PREFORMED manufactured by Hama.
What parts can replace 95787?
There is 1 known substitute for 95787: 94322-1. Substitute compatibility should be verified for your specific system.
What is the NSN for 95787?
95787 is cataloged in the U.S. Government catalog under NSN 5330-00-324-7160. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 95787