PartsTable
Technical Data Sheet
Download PDF

9570733 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9570733: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE OVERALL, hole_diameter: 0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.375 INCHES NOMINAL IN, bolt_circle_diameter: 2.375 INCHES NOMINAL IN, outside_corner_radius: 0.500 INCHES NOMINAL IN, cross-sectional_thickness: 0.031 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-363-5764, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9570733
NSN: 5330-00-363-5764
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialPAPER AND GLUE OVERALL
hole_diameter0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.375 INCHES NOMINAL IN
bolt_circle_diameter2.375 INCHES NOMINAL IN
outside_corner_radius0.500 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center0.938 INCHES NOMINAL IN
material_document_and_classificationMIL-G-12803 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-363-5764
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9570733 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
•
SIDE RADIUS FROM GASKET CENTER: 0.938 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT CIRCLE DIAMETER: 2.375 INCHES NOMINAL IN
•
OUTSIDE CORNER RADIUS: 0.500 INCHES NOMINAL IN
•
MATERIAL: PAPER AND GLUE OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
SIDE RADIUS FROM GASKET CENTER0.938 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH3.375 INCHES NOMINAL IN
BOLT CIRCLE DIAMETER2.375 INCHES NOMINAL IN
OUTSIDE CORNER RADIUS0.500 INCHES NOMINAL IN
MATERIALPAPER AND GLUE OVERALL
HOLE DIAMETER0.562 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
SUBSTITUTES & CROSS-REFERENCES 2
00737 SH 36 ST 164Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
8029159Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9570733?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9570733?
9570733 is a GASKET.
What parts can replace 9570733?
There are 2 known substitutes for 9570733: 00737 SH 36 ST 164, 8029159. Substitute compatibility should be verified for your specific system.
What is the NSN for 9570733?
9570733 is cataloged in the U.S. Government catalog under NSN 5330-00-363-5764. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9570733