PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 95617
95617 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include color: GREEN, inside_width: 5.250 INCHES NOMINAL IN, inside_length: 7.250 INCHES NOMINAL IN, style_designator: HIGH-CUT DIAGONAL SEAM, end_item_identification: THIS ENVELOPE IS TO BE USED AS A FLAT PAPER CONTAINER WITH A SEALABLE FLAP TO ENCLOSE A LETTER OR DOCUMENT, post-consumer_recovered_materials_percentage: 30.0. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-397-9752, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
95617
NSN: 5330-00-397-9752
FSC: 5330
CAGE: 93334 — ATWOOD FENCE CO INC (USA)
SPECIFICATIONS
colorGREEN
inside_width5.250 INCHES NOMINAL IN
inside_length7.250 INCHES NOMINAL IN
style_designatorHIGH-CUT DIAGONAL SEAM
end_item_identificationTHIS ENVELOPE IS TO BE USED AS A FLAT PAPER CONTAINER WITH A SEALABLE FLAP TO ENCLOSE A LETTER OR DOCUMENT
post-consumer_recovered_materials_percentage30.0
NSN5330-00-397-9752
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 95617 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.067 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 1.953 INCHES MINIMUM AND 1.969 INCHES MAXIMUM IN
•
BOLT CIRCLE DIAMETER: 1.453 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.067 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER1.953 INCHES MINIMUM AND 1.969 INCHES MAXIMUM IN
BOLT CIRCLE DIAMETER1.453 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
BA811-4050Interchangeable
interchangeable cross-reference
interchangeable
CM35924Interchangeable
interchangeable cross-reference
interchangeable
34934Interchangeable
interchangeable cross-reference
interchangeable
4995245Interchangeable
interchangeable cross-reference
interchangeable
164444Interchangeable
interchangeable cross-reference
interchangeable
4995245-0Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 95617?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 95617?
95617 is a GASKET.
What parts can replace 95617?
There are 26 known substitutes for 95617: BA811-4050, CM35924, 34934 and 23 more. Substitute compatibility should be verified for your specific system.
Is 95617 still available?
95617 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 95617

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026