PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9560735500
9560735500 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, design_type: LOOP ENGAGING, hole_diameter: 0.131 INCHES NOMINAL IN, overall_width: 1.125 INCHES NOMINAL IN, overall_height: 0.350 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN, overall_length: 2.063 INCHES MINIMUM AND 2.220 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-975-2126, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9560735500
NSN: 5340-00-975-2126
FSC: 5340
CAGE: F0228 — SAFRAN HELICOPTER ENGINES (FRA)
SPECIFICATIONS
materialSTEEL OVERALL
design_typeLOOP ENGAGING
hole_diameter0.131 INCHES NOMINAL IN
hole_quantity2
overall_width1.125 INCHES NOMINAL IN
overall_height0.350 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
overall_length2.063 INCHES MINIMUM AND 2.220 INCHES MAXIMUM IN
operation_methodLEVER
style_designatorLEVER
engaging_surface_width0.600 INCHES NOMINAL IN
engaging_surface_thickness0.812 INCHES NOMINAL IN
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
NSN5340-00-975-2126
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9560735500 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
ENGAGING SURFACE THICKNESS: 0.812 INCHES NOMINAL IN
•
HOLE QUANTITY: 2
•
STYLE DESIGNATOR: LEVER
•
ENGAGING SURFACE WIDTH: 0.600 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
OVERALL HEIGHT0.350 INCHES MINIMUM AND 0.406 INCHES MAXIMUM IN
ENGAGING SURFACE THICKNESS0.812 INCHES NOMINAL IN
HOLE QUANTITY2
STYLE DESIGNATORLEVER
OVERALL WIDTH1.125 INCHES NOMINAL IN
ENGAGING SURFACE WIDTH0.600 INCHES NOMINAL IN
OVERALL LENGTH2.063 INCHES MINIMUM AND 2.220 INCHES MAXIMUM IN
OVERALL WIDTH1.125 INCHES NOMINAL IN
HOLE DIAMETER0.131 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
23977Interchangeable
interchangeable cross-reference
interchangeable
1650H21-020Interchangeable
interchangeable cross-reference
interchangeable
60-2044Interchangeable
interchangeable cross-reference
interchangeable
QQ-A-200/3Interchangeable
interchangeable cross-reference
interchangeable
73909Interchangeable
interchangeable cross-reference
interchangeable
36165-34Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9560735500?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9560735500?
9560735500 is a CATCH,CLAMPING.
What parts can replace 9560735500?
There are 11 known substitutes for 9560735500: 23977, 1650H21-020, 60-2044 and 8 more. Substitute compatibility should be verified for your specific system.
Is 9560735500 still available?
9560735500 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9560735500

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026