PartsTable
Technical Data Sheet
Download PDF

955981-6 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

955981-6: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, outside_diameter: 10.3 MILLIMETERS NOMINAL MM, special_features: MATERIAL IS RUBBER 92453-7 STD 1224,53-NITRILE RUBBER; 70 DEG IRH, center_hole_diameter: 6.95 MILLIMETERS MINIMUM AND 7.25 MILLIMETERS MAXIMUM MM. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-205-9769, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
955981-6
NSN: 5331-01-205-9769
FSC: 5331 — O-ring
CAGE: 61724 — VOLVO PENTA OF THE AMERICAS INC (USA)
SPECIFICATIONS
materialRUBBER
outside_diameter10.3 MILLIMETERS NOMINAL MM
special_featuresMATERIAL IS RUBBER 92453-7 STD 1224,53-NITRILE RUBBER; 70 DEG IRH
center_hole_diameter6.95 MILLIMETERS MINIMUM AND 7.25 MILLIMETERS MAXIMUM MM
NSN5331-01-205-9769
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 955981-6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 10.3 MILLIMETERS NOMINAL MM
•
CENTER HOLE DIAMETER: 6.95 MILLIMETERS MINIMUM AND 7.25 MILLIMETERS MAXIMUM MM
•
MATERIAL: RUBBER
TECHNICAL CHARACTERISTICS
OUTSIDE DIAMETER10.3 MILLIMETERS NOMINAL MM
SPECIAL FEATURESMATERIAL IS RUBBER 92453-7 STD 1224,53-NITRILE RUBBER; 70 DEG IRH
CENTER HOLE DIAMETER6.95 MILLIMETERS MINIMUM AND 7.25 MILLIMETERS MAXIMUM MM
MATERIALRUBBER
SUBSTITUTES & CROSS-REFERENCES 3
5331PL0860291Reference document
Same NSN cross-reference
Reference document — Informative reference only
955981Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
SYB4168Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 955981-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 955981-6?
955981-6 is a O-RING.
What parts can replace 955981-6?
There are 3 known substitutes for 955981-6: 5331PL0860291, 955981, SYB4168. Substitute compatibility should be verified for your specific system.
What is the NSN for 955981-6?
955981-6 is cataloged in the U.S. Government catalog under NSN 5331-01-205-9769. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 955981-6