PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 955846-4
955846-4 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: HEXAGON, nut_height: 0.087 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-926-5804, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
955846-4
NSN: 5310-00-926-5804
FSC: 5310
CAGE: 94580 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE-MINNEAPOLIS (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleHEXAGON
nut_height0.087 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
countersink_angle105.0 DEGREES MINIMUM AND 115.0 DEGREES MAXIMUM NUT
surface_treatmentPASSIVATE OVERALL
width_across_flats0.241 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
nominal_thread_size0.112 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch40
NSN5310-00-926-5804
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 955846-4 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NUT HEIGHT: 0.087 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD QUANTITY PER INCH: 40
•
NOMINAL THREAD SIZE: 0.112 INCHES IN
•
WIDTH ACROSS FLATS: 0.241 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 105.0 DEGREES MINIMUM AND 115.0 DEGREES MAXIMUM NUT
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
NUT HEIGHT0.087 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
NUT STYLEHEXAGON
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD QUANTITY PER INCH40
NOMINAL THREAD SIZE0.112 INCHES IN
WIDTH ACROSS FLATS0.241 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
COUNTERSINK ANGLE105.0 DEGREES MINIMUM AND 115.0 DEGREES MAXIMUM NUT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTPASSIVATE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
D12529P011Interchangeable
interchangeable cross-reference
interchangeable
10121850Interchangeable
interchangeable cross-reference
interchangeable
25-00077-002Interchangeable
interchangeable cross-reference
interchangeable
MS20341-4CInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 955846-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 955846-4?
955846-4 is a NUT,PLAIN,HEXAGON.
What parts can replace 955846-4?
There are 4 known substitutes for 955846-4: D12529P011, 10121850, 25-00077-002 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 955846-4?
955846-4 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-926-5804. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 955846-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026