PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9556C-A-0632HL-17
9556C-A-0632HL-17 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STANDOFF,THREADED,SPACING is a the manufacturer industrial component. Key specifications include length: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN, diameter: 0.312 INCHES NOMINAL IN, special_features: COLOR GOLD, style_designator: PROJECTION ONE END, cross-sectional_shape: ROUND, right_counterbore_depth: 0.132 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-026-3008, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9556C-A-0632HL-17
NSN: 5340-01-026-3008
FSC: 5340
CAGE: 1YGB8 — CAREY MANUFACTURING CO, INC DBA AMATOM ELECTRONIC HARDWARE DIV AMATOM ELECTRONIC HARDWARE (USA)
SPECIFICATIONS
length0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
diameter0.312 INCHES NOMINAL IN
special_featuresCOLOR GOLD
style_designatorPROJECTION ONE END
cross-sectional_shapeROUND
right_counterbore_depth0.132 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
NSN5340-01-026-3008
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9556C-A-0632HL-17 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DIAMETER: 0.312 INCHES NOMINAL IN
•
STYLE DESIGNATOR: PROJECTION ONE END
•
RIGHT COUNTERBORE DEPTH: 0.132 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
•
LENGTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
•
CROSS-SECTIONAL SHAPE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
DIAMETER0.312 INCHES NOMINAL IN
STYLE DESIGNATORPROJECTION ONE END
RIGHT COUNTERBORE DEPTH0.132 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
SPECIAL FEATURESCOLOR GOLD
LENGTH0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
89BInterchangeable
interchangeable cross-reference
interchangeable
1200-0033Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9556C-A-0632HL-17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9556C-A-0632HL-17?
9556C-A-0632HL-17 is a STANDOFF,THREADED,SPACING.
What parts can replace 9556C-A-0632HL-17?
There are 2 known substitutes for 9556C-A-0632HL-17: 89B, 1200-0033. Substitute compatibility should be verified for your specific system.
What is the NSN for 9556C-A-0632HL-17?
9556C-A-0632HL-17 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-026-3008. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9556C-A-0632HL-17

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026