PartsTable
Technical Data Sheet
Download PDF

95542SOCN203-044-005 — BEARING,BALL,DUPLEX

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

95542SOCN203-044-005: BEARING,BALL,DUPLEX.

The BEARING,BALL,DUPLEX is a the manufacturer industrial component. Key specifications include material: GREASE LUBRICATION, bore_diameter: 7.9995 INCHES MINIMUM AND 8.0000 INCHES MAXIMUM IN, overall_width: 1.4600 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN, end_item_identification: JOINT STARS TARGET RADAR SYSTEM, overall_outside_diameter: 9.4895 INCHES MINIMUM AND 9.4900 INCHES MAXIMUM IN, material_document_and_classification: UNABLE TO DECODE. This part is cataloged in the U.S.

Government catalog under NSN 3110-01-458-7889, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
95542SOCN203-044-005
NSN: 3110-01-458-7889
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 95542 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialGREASE LUBRICATION
bore_diameter7.9995 INCHES MINIMUM AND 8.0000 INCHES MAXIMUM IN
overall_width1.4600 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
end_item_identificationJOINT STARS TARGET RADAR SYSTEM
overall_outside_diameter9.4895 INCHES MINIMUM AND 9.4900 INCHES MAXIMUM IN
material_document_and_classificationUNABLE TO DECODE
lubrication_material_document_and_classificationMIL-G-23827 MIL SPEC 2ND MATERIAL RESPONSE
NSN3110-01-458-7889
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 95542SOCN203-044-005 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
OVERALL OUTSIDE DIAMETER: 9.4895 INCHES MINIMUM AND 9.4900 INCHES MAXIMUM IN
•
BORE DIAMETER: 7.9995 INCHES MINIMUM AND 8.0000 INCHES MAXIMUM IN
•
MATERIAL: GREASE LUBRICATION
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
OVERALL WIDTH1.4600 INCHES MINIMUM AND 1.5000 INCHES MAXIMUM IN
OVERALL OUTSIDE DIAMETER9.4895 INCHES MINIMUM AND 9.4900 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONJOINT STARS TARGET RADAR SYSTEM
BORE DIAMETER7.9995 INCHES MINIMUM AND 8.0000 INCHES MAXIMUM IN
MATERIALGREASE LUBRICATION
MATERIALRUBBER SEAL
MATERIALSTEEL COMP 440C BALL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC 2ND MATERIAL RESPONSE
OTHER ITEMS IN FSC 3110 — Bearings, Antifriction, Unmounted
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
3110-00-001-1937 3110-00-001-1938 3110-00-001-4661 3110-00-001-4662 3110-00-001-4689 3110-00-001-4722
SUBSTITUTES & CROSS-REFERENCES 1
203-044-0005Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 95542SOCN203-044-005?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 95542SOCN203-044-005?
95542SOCN203-044-005 is a BEARING,BALL,DUPLEX.
What parts can replace 95542SOCN203-044-005?
There is 1 known substitute for 95542SOCN203-044-005: 203-044-0005. Substitute compatibility should be verified for your specific system.
What is the NSN for 95542SOCN203-044-005?
95542SOCN203-044-005 is cataloged in the U.S. Government catalog under NSN 3110-01-458-7889. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 95542SOCN203-044-005

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.