9548B — REACTOR

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

9548B: REACTOR.

The REACTOR is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, body_width: 3.375 INCHES NOMINAL IN, body_height: 3.250 INCHES NOMINAL IN, body_length: 4.625 INCHES NOMINAL IN, temp_rating: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF, inclosure_type: OPEN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-019-9481, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

9548B

NSN: 5331-00-019-9481
NIINs: 000199481, 006456682
FSC: 5331 — O-ring
CAGE: 8FGX3 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORP DBA STEAM & AIR SOLUTIONS DIV CURTISS-WRIGHT STEAM AND AIR SOLUTIONS (USA)

SPECIFICATIONS

material	RUBBER SILICONE CLASS Q
body_width	3.375 INCHES NOMINAL IN
body_height	3.250 INCHES NOMINAL IN
body_length	4.625 INCHES NOMINAL IN
temp_rating	-85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
inclosure_type	OPEN
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
inductance_type	SWINGING
mounting_method	THREADED STUD(S) SINGLE GROUP
outside_diameter	2.641 INCHES NOMINAL IN
special_features	2.5KV RMS TEST VOLTAGE
winding_quantity	1 SINGLE COMPONENT
NSN	5331-00-019-9481

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 2.641 INCHES NOMINAL IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 2.415 INCHES MINIMUM AND 2.435 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SILICONE CLASS Q

TECHNICAL CHARACTERISTICS

TEMP RATING	-85.0 FAHRENHEIT AND 401.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER	2.641 INCHES NOMINAL IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	2.415 INCHES MINIMUM AND 2.435 INCHES MAXIMUM IN
MATERIAL	RUBBER SILICONE CLASS Q

SUBSTITUTES & CROSS-REFERENCES 6

2-143 S604-70Reference document

Same NSN cross-reference

Reference document — Secondary reference

S-143-S604-70Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

10163194Reference document

Same NSN cross-reference

Reference document — Informative reference only

AS3582-143Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

MS9068-143Reference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS3582Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy 9548B?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 9548B?

9548B is a REACTOR.

What parts can replace 9548B?

There are 6 known substitutes for 9548B: 2-143 S604-70, S-143-S604-70, 10163194 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 9548B?

9548B is cataloged in the U.S. Government catalog under NSN 5331-00-019-9481. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

9548B — REACTOR

Request a Quote — 9548B