PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 954832
954832 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_shape: STRAIGHT, bore_diameter: 14.00 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND, inner_ring_width: 0.4840 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-4174, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
954832
NSN: 3110-00-156-4174
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_shapeSTRAIGHT
bore_diameter14.00 MILLIMETERS NOMINAL MM
seal_quantity1
load_directionRADIAL
surface_finishGROUND
inner_ring_width0.4840 INCHES NOMINAL IN
outer_ring_width0.5000 INCHES NOMINAL IN
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
overall_outside_diameter35.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
NSN3110-00-156-4174
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 954832 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
OUTER RING WIDTH: 0.5000 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
MATERIAL: STEEL BALL
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
OUTER RING WIDTH0.5000 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
INTERNAL FIT-UP DESIGNATIONSTANDARD
MATERIALSTEEL BALL
MATERIALRUBBER SYNTHETIC SEAL
MATERIALSTEEL INNER RING
MATERIALSTEEL INNER RING
MATERIALSTEEL RETAINER
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
7014Interchangeable
interchangeable cross-reference
interchangeable
7018Interchangeable
interchangeable cross-reference
interchangeable
4434Interchangeable
interchangeable cross-reference
interchangeable
8166Interchangeable
interchangeable cross-reference
interchangeable
1018856-001Interchangeable
interchangeable cross-reference
interchangeable
77014Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 954832?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 954832?
954832 is a BEARING,BALL,ANNULAR.
What parts can replace 954832?
There are 16 known substitutes for 954832: 7014, 7018, 4434 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 954832?
954832 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-4174. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 954832

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026