PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 954701
954701 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_shape: STRAIGHT, bore_diameter: 20.00 MILLIMETERS NOMINAL MM, overall_width: 14.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-0550, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
954701
NSN: 3110-00-198-0550
FSC: 3110
CAGE: 63145 — VILTER MFG CORP (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_shapeSTRAIGHT
bore_diameter20.00 MILLIMETERS NOMINAL MM
overall_width14.0 MILLIMETERS NOMINAL MM
seal_quantity1
load_directionRADIAL
surface_finishGROUND
shield_quantity1
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter47.00 MILLIMETERS NOMINAL MM
NSN3110-00-198-0550
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 954701 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL BALL
•
BORE DIAMETER: 20.00 MILLIMETERS NOMINAL MM
•
LOAD DIRECTION: RADIAL
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL BALL
MATERIALSTEEL RETAINER
BORE DIAMETER20.00 MILLIMETERS NOMINAL MM
LOAD DIRECTIONRADIAL
INTERNAL FIT-UP DESIGNATIONSTANDARD
MATERIALSTEEL OUTER RING
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
LOAD DIRECTIONRADIAL
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
SEAL QUANTITY1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
118884Interchangeable
interchangeable cross-reference
interchangeable
1345-9Interchangeable
interchangeable cross-reference
interchangeable
12928.525-2Interchangeable
interchangeable cross-reference
interchangeable
12928-525-2Interchangeable
interchangeable cross-reference
interchangeable
PA25Interchangeable
interchangeable cross-reference
interchangeable
CDA-25AMPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 954701?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 954701?
954701 is a BEARING,BALL,ANNULAR.
What parts can replace 954701?
There are 30 known substitutes for 954701: 118884, 1345-9, 12928.525-2 and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 954701?
954701 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-198-0550. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 954701

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026