95457-3: PIN,STRAIGHT,HEADED.
The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN, diameter: 0.1230 INCHES MINIMUM AND 0.1240 INCHES MAXIMUM IN, material: STEEL OVERALL, head_style: FLAT, chamfer_length: 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN, hardness_rating: 90.0 ROCKWELL C MINIMUM AND 92.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.
Government catalog under NSN 5315-00-837-2945, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| height | 0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN |
| diameter | 0.1230 INCHES MINIMUM AND 0.1240 INCHES MAXIMUM IN |
| material | STEEL OVERALL |
| head_style | FLAT |
| chamfer_length | 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN |
| hardness_rating | 90.0 ROCKWELL C MINIMUM AND 92.0 ROCKWELL C MAXIMUM OVERALL |
| special_features | MATERIAL: STEEL COMP 9310 OVERALL |
| style_designator | STRAIGHT |
| features_provided | CASEHARDENED |
| pin_chamfer_angle | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| pin_head_diameter | 0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| under_head_length | 0.670 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN |
| NSN | 5315-00-837-2945 |
| CHAMFER LENGTH | 0.020 INCHES MINIMUM AND 0.030 INCHES MAXIMUM IN |
| HOLE ARRANGEMENT STYLE | ONE END DRILLED |
| UNDER HEAD LENGTH | 0.670 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN |
| PIN CHAMFER ANGLE | 43.0 DEGREES MINIMUM AND 47.0 DEGREES MAXIMUM |
| FIRST HOLE DIAMETER | 0.065 INCHES NOMINAL IN |
| HARDNESS RATING | 90.0 ROCKWELL C MINIMUM AND 92.0 ROCKWELL C MAXIMUM OVERALL |
| STYLE DESIGNATOR | STRAIGHT |
| PIN HEAD DIAMETER | 0.180 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6260 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| DIAMETER | 0.1230 INCHES MINIMUM AND 0.1240 INCHES MAXIMUM IN |
No substitute or cross-reference records for this part.