PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 954355
954355 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OUTER RING, bore_shape: STRAIGHT, bore_diameter: 55.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 21.0 MILLIMETERS NOMINAL MM, load_direction: ANGULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-6867, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
954355
NSN: 3110-00-156-6867
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OUTER RING
bore_shapeSTRAIGHT
bore_diameter55.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MAXIMUM
overall_width21.0 MILLIMETERS NOMINAL MM
load_directionANGULAR
surface_finishGROUND
style_designatorCOUNTERBORED OUTER RING, NON-SEPARABLE
overall_outside_diameter100.00 MILLIMETERS NOMINAL MM
standard_tolerance_designationABEC NO.1
NSN3110-00-156-6867
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 954355 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
BORE SHAPE: STRAIGHT
•
STYLE DESIGNATOR: COUNTERBORED OUTER RING, NON-SEPARABLE
•
MATERIAL: STEEL OUTER RING
•
CONTACT ANGLE: 25.0 DEGREES MAXIMUM
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
STYLE DESIGNATORCOUNTERBORED OUTER RING, NON-SEPARABLE
MATERIALSTEEL OUTER RING
MATERIALSTEEL INNER RING
MATERIALSTEEL BALL
CONTACT ANGLE25.0 DEGREES MAXIMUM
STANDARD TOLERANCE DESIGNATIONABEC NO.1
BORE DIAMETER55.00 MILLIMETERS NOMINAL MM
OVERALL WIDTH21.0 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
122-660345 PC 30Interchangeable
interchangeable cross-reference
interchangeable
200954Interchangeable
interchangeable cross-reference
interchangeable
122-5277738 ITEM 33Interchangeable
interchangeable cross-reference
interchangeable
1218TFInterchangeable
interchangeable cross-reference
interchangeable
B107.100 CAT 6 ST1Interchangeable
interchangeable cross-reference
interchangeable
J1218TFInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 954355?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 954355?
954355 is a BEARING,BALL,ANNULAR.
What parts can replace 954355?
There are 26 known substitutes for 954355: 122-660345 PC 30, 200954, 122-5277738 ITEM 33 and 23 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 954355?
954355 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-6867. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 954355

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026