The Beam,structural, cataloged under National Stock Number 9540-00-595-8597, is classified within Federal Supply Class 9540 (No Item Name Available) of the Metal Bars, Sheets, and Shapes group. The primary manufacturer of record is Federal Specifications Promulgated by General Services Administration Washington DC. Government technical data includes 28 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 5 commercial cross-references from 5 manufacturers, enabling identification through both NSN and commercial part number lookups. 12 verified substitutes exist in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 9540-00-595-8597 |
| Primary Part Number | QQA200-11 |
| Item Name | Beam,structural |
| FSC / FSG | 9540 / 95 — No Item Name Available |
| Manufacturer | Federal Specifications Promulgated by General Services Administration Washington DC |
| Status | ACTIVE |
| Second Tip Inner Corner Radius | 0.125 INCHES NOMINAL IN |
| Top Flange Width | 0.750 INCHES NOMINAL IN |
| First Tip Thickness | 0.064 INCHES NOMINAL IN |
| Right Side Bottom Flange Thickness | 0.064 INCHES NOMINAL IN |
| Right Bottom Inside Angle | 90.0 DEGREES NOMINAL |
| First Tip Style | FLANGE LEFT DOWNWARD W/ SQUARE END AND INNER AND OUTER CORNER RADII |
| Material Document and Classification | QQ-A-200/11 FED SPEC 1ST MATERIAL RESPONSE |
| Nondefinitive Spec/std Data | T6 TEMPER |
| Material | ALUMINUM ALLOY 7075 |
| Fabrication Method | EXTRUDED |
| Length | 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT |
| Basic Shape Style | Z SHAPE |
| Second Tip Flange Height | 0.189 INCHES NOMINAL IN |
| Second Tip Style | FLANGE RIGHT UPWARD WITH SQUARE END, INNER CORNER RADIUS, AND SQUARE OUTER CORNER |
| Web Flange Thickness | 0.064 INCHES NOMINAL IN |
| Second Tip Relationship to First Tip | NOT IDENTICAL |
| Fillet Radius Where Top Left Flange Joins Web Flange/leg | 0.125 INCHES NOMINAL IN |
| Outer Radius Where Top Left Flange Joins Web Flange | 0.125 INCHES NOMINAL IN |
| Weight Per Unit Measure | 0.310 POUNDS PER LINEAR FOOT LBS |
| Left Top Inside Angle | 90.0 DEGREES NOMINAL |
| Fillet Radius Where Bottom Right Flange Joins Web Flange/leg | 0.125 INCHES NOMINAL IN |
| Bottom Flange Width | 0.938 INCHES NOMINAL IN |
| Second Tip Thickness | 0.064 INCHES NOMINAL IN |
| First Tip Flange Height | 0.250 INCHES NOMINAL IN |
| First Tip Inner Corner Radius | 0.125 INCHES NOMINAL IN |
| First Tip Outer Corner Radius | 0.125 INCHES NOMINAL IN |
| Left Side Top Flange Thickness | 0.064 INCHES NOMINAL IN |
| Heat Treatment | T-6 SOLUTION HEAT TREATED |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| QQA200-11 | Federal Specifications Promulgated by General Services Administration Washington DC (USA) |
| 120001 | Northrop Grumman Systems Corporation (USA) |
| 38355 | Aluminum Co of America (USA) |
| AMS-QQA200-11 | Sae International Dba Sae International (USA) |
| AMS-QQA200-11 | Society of Automotive Engineers Inc (USA) |
NSN 9540-00-595-8597 is a Beam,structural, manufactured by Federal Specifications Promulgated by General Services Administration Washington DC, classified under FSC 9540 (No Item Name Available). Status: active.
NSN 9540-00-595-8597 has 5 cross-referenced part numbers: QQA200-11 (Federal Specifications Promulgated by General Services Administration Washington DC), 120001 (Northrop Grumman Systems Corporation), 38355 (Aluminum Co of America), AMS-QQA200-11 (Sae International Dba Sae International), AMS-QQA200-11 (Society of Automotive Engineers Inc).
There are 12 known substitutes for 9540-00-595-8597: 6520-00-139-4583, 5130-00-304-9724, 5340-00-448-6764 and 9 more. Verify interchangeability with system specifications before substitution.
Key specifications for QQA200-11: Second Tip Inner Corner Radius: 0.125 INCHES NOMINAL IN; Top Flange Width: 0.750 INCHES NOMINAL IN; First Tip Thickness: 0.064 INCHES NOMINAL IN; Right Side Bottom Flange Thickness: 0.064 INCHES NOMINAL IN. 29 total characteristics are documented in the Federal Logistics Information System.