The Beam,structural, cataloged under National Stock Number 9540-00-222-0461, is classified within Federal Supply Class 9540 (No Item Name Available) of the Metal Bars, Sheets, and Shapes group. The primary manufacturer of record is Sae International Dba Sae International. Government technical data includes 19 verified specifications, sourced from the Federal Logistics Information System (FLIS). This item has 5 commercial cross-references from 4 manufacturers, enabling identification through both NSN and commercial part number lookups. 1 verified substitute exists in the FLIS interchangeability database. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 9540-00-222-0461 |
| Primary Part Number | SAE-AMS-QQ-A-200/8 |
| Item Name | Beam,structural |
| FSC / FSG | 9540 / 95 — No Item Name Available |
| Manufacturer | Sae International Dba Sae International |
| Status | ACTIVE |
| Right Side Top Flange Thickness | 0.438 INCHES NOMINAL IN |
| Length | 20.000 FEET MINIMUM AND 30.000 FEET MAXIMUM FT |
| Left Side Top Flange Tip Thickness | 0.375 INCHES NOMINAL IN |
| Left Side Top Flange Thickness | 0.438 INCHES NOMINAL IN |
| Material | ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6062 |
| Nondefinitive Spec/std Data | T6 TEMPER |
| Material Document and Classification | QQ-A-200/8 FED SPEC 1ST MATERIAL RESPONSE |
| Left Top Inside Angle | 90.0 DEGREES NOMINAL |
| Left Side Top Flange Distance to Center of Both Flanges | 1.500 INCHES NOMINAL IN |
| Fillet Radius Where Top Left Flange Joins Web Flange/leg | 0.312 INCHES NOMINAL IN |
| Right Side Top Flange Tip Thickness | 0.375 INCHES NOMINAL IN |
| Fabrication Method | EXTRUDED |
| Top Flange Width | 3.000 INCHES NOMINAL IN |
| Fillet Radius Where Top Right Flange Joins Web Flange/leg | 0.312 INCHES NOMINAL IN |
| Heat Treatment | T-6 SOLUTION HEAT TREATED |
| Right Side Top Flange Distance to Center of Both Flanges | 1.500 INCHES NOMINAL IN |
| Right Top Inside Angle | 90.0 DEGREES NOMINAL |
| Leg Thickness | 0.375 INCHES NOMINAL IN |
| Weight Per Unit Measure | 2.800 POUNDS PER LINEAR FOOT LBS |
| Acquisition Status | ACTIVE |
| HAZMAT | No |
| Part Number | Manufacturer |
|---|---|
| SAE-AMS-QQ-A-200/8 | Sae International Dba Sae International (USA) |
| AMS-QQA200-8 | Sae International Dba Sae International (USA) |
| QQA200-8 | Federal Specifications Promulgated by General Services Administration Washington DC (USA) |
| AMS-QQA200-8 | Society of Automotive Engineers Inc (USA) |
| 853D | Aluminum Co of America (USA) |
NSN 9540-00-222-0461 is a Beam,structural, manufactured by Sae International Dba Sae International, classified under FSC 9540 (No Item Name Available). Status: active.
NSN 9540-00-222-0461 has 5 cross-referenced part numbers: SAE-AMS-QQ-A-200/8 (Sae International Dba Sae International), AMS-QQA200-8 (Sae International Dba Sae International), QQA200-8 (Federal Specifications Promulgated by General Services Administration Washington DC), AMS-QQA200-8 (Society of Automotive Engineers Inc), 853D (Aluminum Co of America).
There is 1 known substitute for 9540-00-222-0461: 9540-00-542-2762. Verify interchangeability with system specifications before substitution.
Key specifications for SAE-AMS-QQ-A-200/8: Right Side Top Flange Thickness: 0.438 INCHES NOMINAL IN; Length: 20.000 FEET MINIMUM AND 30.000 FEET MAXIMUM FT; Left Side Top Flange Tip Thickness: 0.375 INCHES NOMINAL IN; Left Side Top Flange Thickness: 0.438 INCHES NOMINAL IN. 20 total characteristics are documented in the Federal Logistics Information System.