PartsTable
Technical Data Sheet
Download PDF

95357935 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

95357935: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, outside_diameter: 1.989 INCHES MINIMUM AND 2.035 INCHES MAXIMUM IN, center_hole_diameter: 1.724 INCHES MINIMUM AND 1.744 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, end_item_identification: ARMORED MULTI-PURPOSE VEHICLE (AMPV). This part is cataloged in the U.S.

Government catalog under NSN 5331-00-641-3407, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
95357935
NSN: 5331-00-641-3407
NIINs: 006413407, 011979278
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC
outside_diameter1.989 INCHES MINIMUM AND 2.035 INCHES MAXIMUM IN
center_hole_diameter1.724 INCHES MINIMUM AND 1.744 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
end_item_identificationARMORED MULTI-PURPOSE VEHICLE (AMPV)
NSN5331-00-641-3407
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 95357935 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.989 INCHES MINIMUM AND 2.035 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.724 INCHES MINIMUM AND 1.744 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.989 INCHES MINIMUM AND 2.035 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.724 INCHES MINIMUM AND 1.744 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONARMORED MULTI-PURPOSE VEHICLE (AMPV)
MATERIALRUBBER SYNTHETIC
SUBSTITUTES & CROSS-REFERENCES 9
MS28775-224Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
230079114Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5330006413407Reference document
Same NSN cross-reference
Reference document — Secondary reference
ASC1100737Reference document
Same NSN cross-reference
Reference document — Secondary reference
003224EEReference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
SR 832-75-224Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 95357935?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 95357935?
95357935 is a O-RING.
What parts can replace 95357935?
There are 9 known substitutes for 95357935: MS28775-224, 230079114, 5330006413407 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 95357935?
95357935 is cataloged in the U.S. Government catalog under NSN 5331-00-641-3407. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 95357935