PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9534027
9534027 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CUP,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, overall_width: 0.8750 INCHES NOMINAL IN, outside_diameter: 11.5000 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, backface_corner_radius: 0.0620 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA CLASS 4. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-059-2742, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9534027
NSN: 3110-00-059-2742
FSC: 3110
CAGE: 73842 — GOODYEAR TIRE AND RUBBER CO THE (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width0.8750 INCHES NOMINAL IN
outside_diameter11.5000 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
backface_corner_radius0.0620 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 4
NSN3110-00-059-2742
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 9534027 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 11.5000 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0620 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 4
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER11.5000 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0620 INCHES NOMINAL IN
OVERALL WIDTH0.8750 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 4
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
2551-2Interchangeable
interchangeable cross-reference
interchangeable
B7584-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9534027?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9534027?
9534027 is a CUP,TAPERED ROLLER BEARING.
What parts can replace 9534027?
There are 2 known substitutes for 9534027: 2551-2, B7584-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 9534027?
9534027 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-059-2742. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9534027

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026