PartsTable
Technical Data Sheet
Download PDF

952240-7 — BUSHING,MACHINE THREAD

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

952240-7: BUSHING,MACHINE THREAD.

The BUSHING,MACHINE THREAD is a the manufacturer industrial component. Key specifications include diameter: 0.750 INCHES NOMINAL IN, material: STEEL, slot_depth: 0.062 INCHES NOMINAL IN, slot_width: 0.094 INCHES NOMINAL IN, overall_length: 0.562 INCHES NOMINAL IN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-421-4950, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
952240-7
NSN: 5331-00-421-4950
NIINs: 004214950, 006721966
FSC: 5331 — O-ring
CAGE: 06481 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN SYSTEMS CORP (USA)
SPECIFICATIONS
diameter0.750 INCHES NOMINAL IN
materialSTEEL
slot_depth0.062 INCHES NOMINAL IN
slot_width0.094 INCHES NOMINAL IN
overall_length0.562 INCHES NOMINAL IN
thread_directionRIGHT-HAND
nominal_thread_size0.750 INCHES IN
screw_thread_length0.562 INCHES NOMINAL IN
fsc_application_dataBRAKE ASSEMBLY,ACFT WHEEL
hole_inside_diameter0.386 INCHES NOMINAL IN
thread_quantity_per_inch10
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5331-00-421-4950
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 952240-7 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.023 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
•
MATERIAL: RUBBER
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.023 INCHES MINIMUM AND 0.029 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.046 INCHES MINIMUM AND 0.054 INCHES MAXIMUM IN
MATERIALRUBBER
SUBSTITUTES & CROSS-REFERENCES 1
SZ5824-7Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 952240-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 952240-7?
952240-7 is a BUSHING,MACHINE THREAD.
What parts can replace 952240-7?
There is 1 known substitute for 952240-7: SZ5824-7. Substitute compatibility should be verified for your specific system.
What is the NSN for 952240-7?
952240-7 is cataloged in the U.S. Government catalog under NSN 5331-00-421-4950. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 952240-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.