The Strip,metal, cataloged under National Stock Number 9515-00-482-4516, is classified within Federal Supply Class 9515 (Plate, Sheet, Strip, Foil, and Leaf) of the Metal Bars, Sheets, and Shapes group. Government technical data includes 11 specifications, cited from the U.S. Government catalog. 6 additional reference documents (drawings, advisory and superseded references) are recorded in the U.S. Government catalog. Current acquisition status: Active.
| Parameter | Value |
|---|---|
| NSN | 9515-00-482-4516 |
| Item Name | Strip,metal |
| FSC / FSG | 9515 / 95 — Plate, Sheet, Strip, Foil, and Leaf |
| Status | ACTIVE |
| Length | 10.000 FEET NOMINAL FT |
| Cross-Sectional Thickness | 0.0020 INCHES NOMINAL IN |
| Cross-Sectional Width | 12.000 INCHES NOMINAL IN |
| Heat Treatment | ANNEALED |
| Material Document and Classification | AMS 5513, COMPOSITION 304 ASSN STD SINGLE MATERIAL RESPONSE |
| Surface Condition | BRIGHT OVERALL |
| Weight Per Unit Measure | 0.084 POUNDS PER LINEAR FOOT LBS |
| Nondefinitive Spec/std Data | 304 COMPOSITION AND ANNEALED CONDITION |
| Minimum Tensile Strength | 75000 POUNDS PER SQUARE INCH LBS |
| Material | STEEL COMP 304 |
| Fabrication Method | COLD ROLLED |
| Acquisition Status | ACTIVE |
| DEMIL Code | DEMIL A — No Demilitarization Required |
| Hazard | No hazard code in the DLA record (HMIC N) |
| Criticality Code | X |
| Reference | Meaning |
|---|---|
| AMS 5513 | 5/9 Secondary reference U.S. Government activity |
| AMS 2807 | 5/9 Secondary reference U.S. Government activity |
| AMS5513G | 5/9 Secondary reference U.S. Government activity |
| MIL-S-5059 | 5/9 Secondary reference U.S. Government activity |
| 880AA216 | C/1 Advisory reference — outside the item-of-supply concept Owens-Corning Fiberglas Corp |
| AMS 5513 | 3/1 Design control — primary reference Sae International Dba Sae International |
NSN 9515-00-482-4516 is a Strip,metal, classified under FSC 9515, Plate, Sheet, Strip, Foil, and Leaf. Status: active.
Key specifications for 9515-00-482-4516: Length: 10.000 FEET NOMINAL FT; Cross-Sectional Thickness: 0.0020 INCHES NOMINAL IN; Cross-Sectional Width: 12.000 INCHES NOMINAL IN; Heat Treatment: ANNEALED. 11 specifications are documented in the U.S. Government catalog.
No hazard code in the DLA record (HMIC N). Hazard information on this page is shown exactly as it appears in the DLA record.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-16.
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.