PartsTable
Technical Data Sheet
Download PDF

9514M83P02 — NUT,SELF-LOCKING,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

9514M83P02: NUT,SELF-LOCKING,CLINCH.

The NUT,SELF-LOCKING,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: CLINCH, nut_height: 0.680 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN, nut_diameter: 0.585 INCHES MINIMUM AND 0.595 INCHES MAXIMUM IN, pilot_length: 0.225 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN, thread_class: 3B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-183-9930, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9514M83P02
NSN: 5310-01-183-9930
FSC: 5310 — Nuts and Washers
CAGE: 56878 — SPS TECHNOLOGIES, LLC DBA PB FASTENERS (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleCLINCH
nut_height0.680 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
nut_diameter0.585 INCHES MINIMUM AND 0.595 INCHES MAXIMUM IN
pilot_length0.225 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
pilot_diameter0.368 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
nominal_thread_size0.3125 INCHES IN
thread_quantity_per_inch24
NSN5310-01-183-9930
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9514M83P02 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS5709 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.3125 INCHES IN
•
NUT DIAMETER: 0.585 INCHES MINIMUM AND 0.595 INCHES MAXIMUM IN
•
PILOT DIAMETER: 0.368 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.225 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN
•
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN
TECHNICAL CHARACTERISTICS
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5709 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.3125 INCHES IN
NUT DIAMETER0.585 INCHES MINIMUM AND 0.595 INCHES MAXIMUM IN
PILOT DIAMETER0.368 INCHES MINIMUM AND 0.372 INCHES MAXIMUM IN
PILOT LENGTH0.225 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
NUT HEIGHT0.680 INCHES MINIMUM AND 0.710 INCHES MAXIMUM IN
NUT STYLECLINCH
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 3
9514M83P03Reference document
Same NSN cross-reference
Reference document — Secondary reference
9514M83P01Reference document
Same NSN cross-reference
Reference document — Secondary reference
9514M83P04Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 9514M83P02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9514M83P02?
9514M83P02 is a NUT,SELF-LOCKING,CLINCH.
What parts can replace 9514M83P02?
There are 3 known substitutes for 9514M83P02: 9514M83P03, 9514M83P01, 9514M83P04. Substitute compatibility should be verified for your specific system.
What is the NSN for 9514M83P02?
9514M83P02 is cataloged in the U.S. Government catalog under NSN 5310-01-183-9930. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9514M83P02

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.