The GASKET is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 RETAINER, end_radius: 0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN, hole_diameter: 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_length: 1.570 INCHES MINIMUM AND 1.650 INCHES MAXIMUM IN, special_features: ONE SIDE FLAT WITHOUT RADIUS;CENTER LINE OF HOLES 0.133 OFF CENTER OF APERATURE CENTER LINE, aperture_diameter: 0.200 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN. This part is cataloged in the U.S.
Government catalog under NSN 5330-01-200-5180, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
9510M48P03
NSN:5330-01-200-5180 FSC:5330 — Packing and Gasket Materials CAGE:07482 — GENERAL ELECTRIC COMPANY (USA)
SPECIFICATIONS
material
ALUMINUM ALLOY 6061 RETAINER
end_radius
0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
hole_diameter
0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_length
1.570 INCHES MINIMUM AND 1.650 INCHES MAXIMUM IN
special_features
ONE SIDE FLAT WITHOUT RADIUS;CENTER LINE OF HOLES 0.133 OFF CENTER OF APERATURE CENTER LINE
aperture_diameter
0.200 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN
surface_treatment
ANODIZE RETAINER
gage_ring_thickness
0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
elongation_percentage
125 MAXIMUM
outside_corner_radius
0.230 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
cross-sectional_thickness
0.421 INCHES MINIMUM AND 0.445 INCHES MAXIMUM IN
cross-sectional_shape_style
METAL AND SYNTHETIC RUBBER
NSN
5330-01-200-5180
COMPONENT DIAGRAM
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2472 ASSN STD SINGLE TREATMENT RESPONSE RETAINER
•
CROSS-SECTIONAL THICKNESS: 0.421 INCHES MINIMUM AND 0.445 INCHES MAXIMUM IN
•
END RADIUS: 0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
•
GAGE RING THICKNESS: 0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 4027 ASSN STD SINGLE MATERIAL RESPONSE RETAINER
•
CROSS-SECTIONAL SHAPE STYLE: METAL AND SYNTHETIC RUBBER
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
AMS 2472 ASSN STD SINGLE TREATMENT RESPONSE RETAINER
CROSS-SECTIONAL THICKNESS
0.421 INCHES MINIMUM AND 0.445 INCHES MAXIMUM IN
END RADIUS
0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM IN
GAGE RING THICKNESS
0.385 INCHES MINIMUM AND 0.395 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION
AMS 4027 ASSN STD SINGLE MATERIAL RESPONSE RETAINER
MATERIAL DOCUMENT AND CLASSIFICATION
MIL-R-83248 MIL SPEC SINGLE MATERIAL RESPONSE INSERT
OVERALL LENGTH
1.570 INCHES MINIMUM AND 1.650 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLE
METAL AND SYNTHETIC RUBBER
APERTURE DIAMETER
0.200 INCHES MINIMUM AND 0.208 INCHES MAXIMUM IN
ELONGATION PERCENTAGE
125 MAXIMUM
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9510M48P03?
9510M48P03 is a GASKET.
What parts can replace 9510M48P03?
There are 4 known substitutes for 9510M48P03: CA-9633, CA-9633-1, 9510M48P04 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9510M48P03?
9510M48P03 is cataloged in the U.S. Government catalog under NSN 5330-01-200-5180. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.