PartsTable
Technical Data Sheet
PartsTable / MRO / 95106
95106 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The CIRCUIT BREAKER is a the manufacturer industrial component. Key specifications include phase: THREE, diameter: 0.131 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN, material: STEEL COMP 1070 OR STEEL COMP 1074 OR STEEL COMP 1080 OR STEEL COMP 1086 OR STEEL COMP 1095 OVERALL, body_style: BUSHING MOUNTED, body_width: 0.750 INCHES NOMINAL IN, body_height: 1.160 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-058-6081, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 95106
NSN: 5315-00-058-6081
FSC: 5315
CAGE: 13629 — COLT'S MANUFACTURING COMPANY, LLC (USA)
SPECIFICATIONS
phaseTHREE
diameter0.131 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
materialSTEEL COMP 1070 OR STEEL COMP 1074 OR STEEL COMP 1080 OR STEEL COMP 1086 OR STEEL COMP 1095 OVERALL
body_styleBUSHING MOUNTED
body_width0.750 INCHES NOMINAL IN
body_height1.160 INCHES NOMINAL IN
body_length1.180 INCHES NOMINAL IN
bushing_length0.445 INCHES MINIMUM AND 0.455 INCHES MAXIMUM IN
inclosure_typeFULLY INCLOSED
overall_length0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
shear_strength2100 DOUBLE POUND
actuator_height0.345 INCHES MINIMUM AND 0.355 INCHES MAXIMUM IN
NSN5315-00-058-6081
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 95106 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SLOTTED
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: DOD-P-16232,CL2 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
DIAMETER: 0.131 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
HARDNESS RATING: 46.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
•
SHEAR STRENGTH: 2100 DOUBLE POUND
•
MATERIAL: STEEL COMP 1070 OR STEEL COMP 1074 OR STEEL COMP 1080 OR STEEL COMP 1086 OR STEEL COMP 1095 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSLOTTED
OVERALL LENGTH0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONDOD-P-16232,CL2 NATIONAL SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
DIAMETER0.131 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
HARDNESS RATING46.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
SHEAR STRENGTH2100 DOUBLE POUND
MATERIALSTEEL COMP 1070 OR STEEL COMP 1074 OR STEEL COMP 1080 OR STEEL COMP 1086 OR STEEL COMP 1095 OVERALL
SURFACE TREATMENTPHOSPHATE ZINC OVERALL
MATERIAL THICKNESS0.028 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
13855Interchangeable
interchangeable cross-reference
interchangeable
70278Interchangeable
interchangeable cross-reference
interchangeable
100585Interchangeable
interchangeable cross-reference
interchangeable
PB221Interchangeable
interchangeable cross-reference
interchangeable
AA59400-1A3Interchangeable
interchangeable cross-reference
interchangeable
A-A-59400AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 95106?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 95106?
95106 is a CIRCUIT BREAKER. It is classified as a MRO (MRO_GENERAL).
What parts can replace 95106?
There are 24 known substitutes for 95106: 13855, 70278, 100585 and 21 more. Substitute compatibility should be verified for your specific system.
Is 95106 still available?
95106 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 95106

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026