PartsTable
Technical Data Sheet
Download PDF

9510236 — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

9510236: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, thickness: 0.0309 INCHES MINIMUM AND 0.0409 INCHES MAXIMUM IN, hole_diameter: 1.521 INCHES MINIMUM AND 1.541 INCHES MAXIMUM IN, overall_diameter: 2.429 INCHES MINIMUM AND 2.433 INCHES MAXIMUM IN, surface_treatment: ZINC OVERALL, peripheral_shape_style: ROUND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-246-0709, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9510236
NSN: 5310-00-246-0709
NIINs: 002460709, 013978401
FSC: 5310 — Nuts and Washers
CAGE: 0B9R9 — MEGGITT AIRCRAFT BRAKING SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
thickness0.0309 INCHES MINIMUM AND 0.0409 INCHES MAXIMUM IN
hole_diameter1.521 INCHES MINIMUM AND 1.541 INCHES MAXIMUM IN
overall_diameter2.429 INCHES MINIMUM AND 2.433 INCHES MAXIMUM IN
surface_treatmentZINC OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationQQ-S-636-CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-246-0709
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 9510236 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 2.429 INCHES MINIMUM AND 2.433 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-636-CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
SURFACE TREATMENT: ZINC OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: STEEL OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 1.521 INCHES MINIMUM AND 1.541 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER2.429 INCHES MINIMUM AND 2.433 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-636-CANCELED FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
SURFACE TREATMENTZINC OVERALL
PERIPHERAL SHAPE STYLEROUND
MATERIALSTEEL OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER1.521 INCHES MINIMUM AND 1.541 INCHES MAXIMUM IN
THICKNESS0.0309 INCHES MINIMUM AND 0.0409 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 1
5310L20-017Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 9510236?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9510236?
9510236 is a WASHER,FLAT.
What parts can replace 9510236?
There is 1 known substitute for 9510236: 5310L20-017. Substitute compatibility should be verified for your specific system.
What is the NSN for 9510236?
9510236 is cataloged in the U.S. Government catalog under NSN 5310-00-246-0709. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9510236

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.