PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 950726-22
950726-22 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN, thread_length: 0.669 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, screw_material: STEEL CORROSION RESISTING OR STEEL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-231-9808, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
950726-22
NSN: 5305-00-231-9808
FSC: 5305
CAGE: 06481 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN SYSTEMS CORP (USA)
SPECIFICATIONS
head_stylePAN
head_height0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
thread_length0.669 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
screw_materialSTEEL CORROSION RESISTING OR STEEL
fastener_length0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch40
NSN5305-00-231-9808
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 950726-22 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
THREAD LENGTH: 0.669 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
THREAD QUANTITY PER INCH: 40
TECHNICAL CHARACTERISTICS (FLIS)
FASTENER LENGTH0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,300 SERIES FED SPEC 1ST MATERIAL RESPONSE OR 66,300 SERIES FED STD 1ST MATERIAL RESPONSE OR COMP 16-18 OR 18-8 ASSN STD 2ND MATERIAL RESPONSE
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER0.112 INCHES IN
THREAD LENGTH0.669 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH40
HEAD HEIGHT0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATA3 TYPE AND 9C STYLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
10125451Interchangeable
interchangeable cross-reference
interchangeable
AN505C6-7Interchangeable
interchangeable cross-reference
interchangeable
100037-6Interchangeable
interchangeable cross-reference
interchangeable
FFS92Interchangeable
Same NIIN cross-reference
interchangeable
418331-29Interchangeable
Same NIIN cross-reference
interchangeable
MS51957-19BInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 950726-22?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 950726-22?
950726-22 is a SCREW,MACHINE.
What parts can replace 950726-22?
There are 11 known substitutes for 950726-22: 10125451, AN505C6-7, 100037-6 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 950726-22?
950726-22 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-231-9808. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 950726-22

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026