PartsTable
Technical Data Sheet
Download PDF

95071-1 — BRACE,WRIST AND FOREARM

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

95071-1: BRACE,WRIST AND FOREARM.

The BRACE,WRIST AND FOREARM is a the manufacturer industrial component. Key specifications include width: 8.750 INCHES NOMINAL IN, material: COTTON OVERALL, usage_location: RIGHT ARM, size_designation: MEDIUM, design_designation: ORTHOPEDIC, part_name_assigned_by_controlling_agency: BRACE WRIST & FOREARM ORTHOPEDIC COT RT ARM MEDIUM 7.5INX8.75IN IN. This part is cataloged in the U.S.

Government catalog under NSN 3120-00-339-2597, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
95071-1
NSN: 3120-00-339-2597
NIINs: 003392597, 013205355, 014198570
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: 93232 — CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION DBA CURTISS WRIGHT ENGINEERED PUMP DIVISION USE CAGE CODE 0UBG9 FOR CATALOGING (USA)
SPECIFICATIONS
width8.750 INCHES NOMINAL IN
materialCOTTON OVERALL
usage_locationRIGHT ARM
size_designationMEDIUM
special_featuresMEDIUM; RIGHT ARM; 7-1/2 IN. L; 8-3/4 IN. W; COTTON ON THE OUTSIDE WITH GEL INSERT; ORTHOPEDIC DEVICE USED FOR HOT AND OR COLD THERAPY IN
design_designationORTHOPEDIC
part_name_assigned_by_controlling_agencyBRACE WRIST & FOREARM ORTHOPEDIC COT RT ARM MEDIUM 7.5INX8.75IN IN
NSN3120-00-339-2597
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 95071-1 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BODY OUTSIDE DIAMETER: 5.7500 INCHES NOMINAL IN
•
BODY INSIDE DIAMETER: 2.5620 INCHES MINIMUM AND 2.5650 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
BODY OUTSIDE DIAMETER5.7500 INCHES NOMINAL IN
OVERALL LENGTH1.0000 INCHES NOMINAL IN
BODY INSIDE DIAMETER2.5620 INCHES MINIMUM AND 2.5650 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
CS4320-0114Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1269PReference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 95071-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 95071-1?
95071-1 is a BRACE,WRIST AND FOREARM.
What parts can replace 95071-1?
There are 2 known substitutes for 95071-1: CS4320-0114, 1269P. Substitute compatibility should be verified for your specific system.
What is the NSN for 95071-1?
95071-1 is cataloged in the U.S. Government catalog under NSN 3120-00-339-2597. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 95071-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.