The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.681 INCHES MINIMUM AND 0.707 INCHES MAXIMUM IN, center_hole_diameter: 0.525 INCHES MINIMUM AND 0.535 INCHES MAXIMUM IN, elongation_percentage: 331 MAXIMUM. This part is cataloged in the U.S.
Government catalog under NSN 5331-01-043-5512, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
95040-7
NSN:5331-01-043-5512 FSC:5331 — O-ring CAGE:50988 — DYNEX/RIVETT CORP POWER UNITS AND SYSTEMS (USA)
SPECIFICATIONS
material
RUBBER SILICONE CLASS Q
temp_rating
-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating
70.0 SHORE DUROMETER A NOMINAL
outside_diameter
0.681 INCHES MINIMUM AND 0.707 INCHES MAXIMUM IN
center_hole_diameter
0.525 INCHES MINIMUM AND 0.535 INCHES MAXIMUM IN
elongation_percentage
331 MAXIMUM
cross-sectional_height
0.079 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
NSN
5331-01-043-5512
COMPONENT DIAGRAM
KEY FEATURES
•
TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.079 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.681 INCHES MINIMUM AND 0.707 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 331 MAXIMUM
•
CENTER HOLE DIAMETER: 0.525 INCHES MINIMUM AND 0.535 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
TECHNICAL CHARACTERISTICS
TEMP RATING
-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT
0.079 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
OUTSIDE DIAMETER
0.681 INCHES MINIMUM AND 0.707 INCHES MAXIMUM IN
HARDNESS RATING
70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE
331 MAXIMUM
CENTER HOLE DIAMETER
0.525 INCHES MINIMUM AND 0.535 INCHES MAXIMUM IN
MATERIAL
RUBBER SILICONE CLASS Q
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 95040-7?
95040-7 is a O-RING.
What parts can replace 95040-7?
There is 1 known substitute for 95040-7: 60108907. Substitute compatibility should be verified for your specific system.
What is the NSN for 95040-7?
95040-7 is cataloged in the U.S. Government catalog under NSN 5331-01-043-5512. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.