PartsTable
Technical Data Sheet
Download PDF

950370-2 — CATCH,CLAMPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

950370-2: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include material: ALUMINUM OVERALL, design_type: CLAW ENGAGING, hole_diameter: 0.097 INCHES NOMINAL IN, overall_width: 0.850 INCHES NOMINAL IN, overall_height: 0.250 INCHES NOMINAL IN, overall_length: 1.960 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-806-0758, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
950370-2
NSN: 5340-00-806-0758
FSC: 5340 — Hardware, Commercial
CAGE: 06481 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN SYSTEMS CORP (USA)
SPECIFICATIONS
materialALUMINUM OVERALL
design_typeCLAW ENGAGING
hole_diameter0.097 INCHES NOMINAL IN
hole_quantity2
overall_width0.850 INCHES NOMINAL IN
overall_height0.250 INCHES NOMINAL IN
overall_length1.960 INCHES NOMINAL IN
operation_methodLEVER HANDLE
style_designatorLEVER
surface_treatmentCADMIUM OVERALL
end_item_identificationW/S: AIRCRAFT, STARLIFTER C-141
NSN5340-00-806-0758
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 950370-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: CLAW ENGAGING
•
STYLE DESIGNATOR: LEVER
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: ALUMINUM OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.250 INCHES NOMINAL IN
DESIGN TYPECLAW ENGAGING
STYLE DESIGNATORLEVER
OVERALL LENGTH1.960 INCHES NOMINAL IN
OVERALL WIDTH0.850 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OVERALL
END ITEM IDENTIFICATIONW/S: AIRCRAFT, STARLIFTER C-141
MATERIALALUMINUM OVERALL
HOLE QUANTITY2
OPERATION METHODLEVER HANDLE
SUBSTITUTES & CROSS-REFERENCES 2
10106517Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
30L1-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 950370-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 950370-2?
950370-2 is a CATCH,CLAMPING.
What parts can replace 950370-2?
There are 2 known substitutes for 950370-2: 10106517, 30L1-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 950370-2?
950370-2 is cataloged in the U.S. Government catalog under NSN 5340-00-806-0758. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 950370-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.