PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 950354
950354 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The SLEEVE,IGNITION TERMINAL is a the manufacturer industrial component. Key specifications include length: 0.562 INCHES NOMINAL IN, material: CERAMIC BODY, contact_type: SPRING, inside_diameter: 0.290 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN, outside_diameter: 0.364 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN, special_features: SUPPORTS GRUMMAN A10 AIRCRAFT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-151-8431, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
950354
NSN: 3110-00-151-8431
FSC: 3110
CAGE: 25500 — LOCKHEED MARTIN CORPORATION DBA LOCKHEED MARTIN DIV ROTARY AND MISSION SYSTEMS (USA)
SPECIFICATIONS
length0.562 INCHES NOMINAL IN
materialCERAMIC BODY
contact_typeSPRING
inside_diameter0.290 INCHES MINIMUM AND 0.300 INCHES MAXIMUM IN
outside_diameter0.364 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
special_featuresSUPPORTS GRUMMAN A10 AIRCRAFT
accommodated_wire_size7.0 MILLIMETERS NOMINAL MM
contact_protrusion_length0.234 INCHES NOMINAL IN
NSN3110-00-151-8431
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 950354 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
OUTSIDE DIAMETER: 4.7812 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0800 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
TECHNICAL CHARACTERISTICS (FLIS)
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OUTSIDE DIAMETER4.7812 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0800 INCHES NOMINAL IN
OVERALL WIDTH0.8600 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
2216Interchangeable
interchangeable cross-reference
interchangeable
10-52605Interchangeable
interchangeable cross-reference
interchangeable
34479Interchangeable
interchangeable cross-reference
interchangeable
950354Interchangeable
interchangeable cross-reference
interchangeable
3110PL0738675Interchangeable
Same NIIN cross-reference
interchangeable
34479-20629Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 950354?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 950354?
950354 is a SLEEVE,IGNITION TERMINAL.
What parts can replace 950354?
There are 7 known substitutes for 950354: 2216, 10-52605, 34479 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 950354?
950354 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-151-8431. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 950354

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026