PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 950086-9
950086-9 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,SYNCHRO is a the manufacturer industrial component. Key specifications include width: 0.375 INCHES NOMINAL IN, height: 0.263 INCHES NOMINAL IN, length: 0.312 INCHES NOMINAL IN, material: STEEL CORROSION RESISTING, hole_diameter: 0.128 INCHES NOMINAL IN, furnished_items: LOCKNUT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-831-3022, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
950086-9
NSN: 5340-00-831-3022
FSC: 5340
CAGE: 06481 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN SYSTEMS CORP (USA)
SPECIFICATIONS
width0.375 INCHES NOMINAL IN
height0.263 INCHES NOMINAL IN
length0.312 INCHES NOMINAL IN
materialSTEEL CORROSION RESISTING
hole_diameter0.128 INCHES NOMINAL IN
furnished_itemsLOCKNUT
surface_treatmentPASSIVATE
NSN5340-00-831-3022
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 950086-9 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL CORROSION RESISTING
•
HEIGHT: 0.263 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.128 INCHES NOMINAL IN
•
LENGTH: 0.312 INCHES NOMINAL IN
•
SURFACE TREATMENT: PASSIVATE
•
WIDTH: 0.375 INCHES NOMINAL IN
•
FURNISHED ITEMS: LOCKNUT
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL CORROSION RESISTING
HEIGHT0.263 INCHES NOMINAL IN
HOLE DIAMETER0.128 INCHES NOMINAL IN
LENGTH0.312 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE
WIDTH0.375 INCHES NOMINAL IN
FURNISHED ITEMSLOCKNUT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
E150Upgraded Successor
successor cross-reference
successor
4AUpgraded Successor
successor cross-reference
successor
L28Upgraded Successor
successor cross-reference
successor
423568Interchangeable
interchangeable cross-reference
interchangeable
5305000423568Interchangeable
interchangeable cross-reference
interchangeable
214003H1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 950086-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 950086-9?
950086-9 is a CLAMP,SYNCHRO.
What parts can replace 950086-9?
There are 19 known substitutes for 950086-9: E150, 4A, L28 and 16 more. Substitute compatibility should be verified for your specific system.
Is 950086-9 still available?
950086-9 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 950086-9

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026