PartsTable
Technical Data Sheet

950.6-200-K3/4F — HANDWHEEL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

950.6-200-K3/4F: HANDWHEEL.

The HANDWHEEL is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, hub_length: 0.94 INCHES NOMINAL IN, key_length: 0.94 INCHES NOMINAL IN, overall_height: 1.75 INCHES NOMINAL IN, handwheel_style: SPOKES, inside_diameter: 0.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-664-4550, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
950.6-200-K3/4F
NSN: 5340-01-664-4550
FSC: 5340 — Hardware, Commercial
CAGE: 0XY83 — JW WINCO INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
hub_length0.94 INCHES NOMINAL IN
key_length0.94 INCHES NOMINAL IN
grip_quantity1
overall_height1.75 INCHES NOMINAL IN
spoke_quantity3
handwheel_styleSPOKES
inside_diameter0.750 INCHES NOMINAL IN
mounting_methodTHREAD HANDLE
outside_diameter7.87 INCHES NOMINAL IN
drive_facility_styleROUND
hub_outside_diameter1.46 INCHES NOMINAL IN
NSN5340-01-664-4550
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 950.6-200-K3/4F MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HUB OUTSIDE DIAMETER: 1.46 INCHES NOMINAL IN
•
GRIP QUANTITY: 1
•
HUB LENGTH: 0.94 INCHES NOMINAL IN
•
MOUNTING METHOD: THREAD HANDLE
•
OUTSIDE DIAMETER: 7.87 INCHES NOMINAL IN
•
DRIVE FACILITY STYLE: ROUND
•
HANDWHEEL STYLE: SPOKES
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT1.75 INCHES NOMINAL IN
HUB OUTSIDE DIAMETER1.46 INCHES NOMINAL IN
GRIP QUANTITY1
HUB LENGTH0.94 INCHES NOMINAL IN
MOUNTING METHODTHREAD HANDLE
OUTSIDE DIAMETER7.87 INCHES NOMINAL IN
DRIVE FACILITY STYLEROUND
HANDWHEEL STYLESPOKES
INSIDE DIAMETER0.750 INCHES NOMINAL IN
KEY LENGTH0.94 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
609-30-00 ITEM 38Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 950.6-200-K3/4F?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 950.6-200-K3/4F?
950.6-200-K3/4F is a HANDWHEEL.
What parts can replace 950.6-200-K3/4F?
There is 1 known substitute for 950.6-200-K3/4F: 609-30-00 ITEM 38. Substitute compatibility should be verified for your specific system.
What is the NSN for 950.6-200-K3/4F?
950.6-200-K3/4F is cataloged in the U.S. Government catalog under NSN 5340-01-664-4550. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 950.6-200-K3/4F

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.