PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 95-W1-1H ITEM B
95-W1-1H ITEM B ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include color: WHITE OVERALL, width: 1.438 INCHES NOMINAL IN, length: 4.000 INCHES NOMINAL IN, material: PAPER, body_width: 0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, body_height: 0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-215-7073, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
95-W1-1H ITEM B
NSN: 3110-01-215-7073
FSC: 3110
CAGE: 52033 — DRC ACQUISITION INC (USA)
SPECIFICATIONS
colorWHITE OVERALL
width1.438 INCHES NOMINAL IN
length4.000 INCHES NOMINAL IN
materialPAPER
body_width0.220 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
body_height0.140 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
body_length0.785 INCHES MAXIMUM IN
design_typeNONREUSABLE
special_featuresARTICLE NUMBER, 04010; QUANTITY, 2; SEAL KIT ARTICLE NUMBER, 30980; QUANTITY, 2; FILTER TYPE, SWK 2000-40-U DUPLEX
adhesive_locationBACK
attachment_methodPRESSURE SENSITIVE ADHESIVE
basic_shape_styleRECTANGULAR
NSN3110-01-215-7073
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 95-W1-1H ITEM B · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
70621Interchangeable
interchangeable cross-reference
interchangeable
04010Interchangeable
interchangeable cross-reference
interchangeable
6423SWInterchangeable
interchangeable cross-reference
interchangeable
0N296444-21Interchangeable
interchangeable cross-reference
interchangeable
280-22002-238Interchangeable
interchangeable cross-reference
interchangeable
9LS30PCQMInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 95-W1-1H ITEM B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 95-W1-1H ITEM B?
95-W1-1H ITEM B is a BEARING,BALL,ANNULAR.
What parts can replace 95-W1-1H ITEM B?
There are 6 known substitutes for 95-W1-1H ITEM B: 70621, 04010, 6423SW and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 95-W1-1H ITEM B?
95-W1-1H ITEM B is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-215-7073. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 95-W1-1H ITEM B

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026