95-J-110 — RESISTOR,FIXED,WIRE WOUND,INDUCT

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

95-J-110: RESISTOR,FIXED,WIRE WOUND,INDUCT.

RESISTOR,FIXED,WIRE WOUND,INDUCT. Key specifications include material: STEEL COMP 1022 OR STEEL COMP 8620, thickness: 0.500 INCHES NOMINAL IN, body_length: 0.875 INCHES NOMINAL IN, body_diameter: 0.312 INCHES NOMINAL IN, bore_diameter: 0.7969 INCHES NOMINAL IN, terminal_type: WIRE LEAD. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-105-5215, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 95-J-110

NSN: 5905-01-105-5215
NIINs: 011055215, 011942019, 011942075, 011942076, 012016598, 012029584, 012704322
FSC: 5905 — Resistor
CAGE: 44655 — OHMITE HOLDING, L.L.C. DBA OHMITE MANUFACTURING (USA)

SPECIFICATIONS

material	STEEL COMP 1022 OR STEEL COMP 8620
thickness	0.500 INCHES NOMINAL IN
body_length	0.875 INCHES NOMINAL IN
body_diameter	0.312 INCHES NOMINAL IN
bore_diameter	0.7969 INCHES NOMINAL IN
step_quantity	4
terminal_type	WIRE LEAD
end_similarity	NOT IDENTICAL
inclosure_type	ENCAPSULATED
overall_length	15.500 INCHES NOMINAL IN
surface_finish	63.0 MICROINCHES
first_end_style	EXTERNAL THREADED
NSN	5905-01-105-5215

COMPONENT DIAGRAM

KEY FEATURES

•

RESISTANCE TOLERANCE IN PERCENT: -1.000 TO 1.000

•

TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS: -20.0 TO 20.0

•

BODY DIAMETER: 0.312 INCHES NOMINAL IN

•

ELECTRICAL RESISTANCE: 110.000 OHMS

•

INCLOSURE TYPE: ENCAPSULATED

•

TERMINAL TYPE: WIRE LEAD

•

TERMINAL LENGTH: 1.500 INCHES MINIMUM IN

•

TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS: -55.0 TO 275.0

TECHNICAL CHARACTERISTICS

RESISTANCE TOLERANCE IN PERCENT	-1.000 TO 1.000
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS	-20.0 TO 20.0
BODY DIAMETER	0.312 INCHES NOMINAL IN
ELECTRICAL RESISTANCE	110.000 OHMS
INCLOSURE TYPE	ENCAPSULATED
TERMINAL TYPE	WIRE LEAD
TERMINAL LENGTH	1.500 INCHES MINIMUM IN
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS	-55.0 TO 275.0
STYLE DESIGNATOR	AXIAL TERMINAL EACH END
RELIABILITY FAILURE RATE LEVEL IN PERCENT	0.001

SUBSTITUTES & CROSS-REFERENCES 6

RWR84S1100FRReference document

Same NSN cross-reference

Reference document — Secondary reference

RWR84S1100FMReference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-PRF-39007/10Reference document

Same NSN cross-reference

Reference document — Identification reference

MIL-R-39007/10Reference document

Same NSN cross-reference

Reference document — Secondary reference

RWR84S1100FSSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

995-5B-110R0-JReference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 95-J-110?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 95-J-110?

95-J-110 is a RESISTOR,FIXED,WIRE WOUND,INDUCT. It is classified as a MRO (MRO_GENERAL).

What parts can replace 95-J-110?

There are 6 known substitutes for 95-J-110: RWR84S1100FR, RWR84S1100FM, MIL-PRF-39007/10 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 95-J-110?

95-J-110 is cataloged in the U.S. Government catalog under NSN 5905-01-105-5215. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

95-J-110 — RESISTOR,FIXED,WIRE WOUND,INDUCT

Request a Quote — 95-J-110