PartsTable
Technical Data Sheet
Download PDF

95-0701 — DILATOR SET,VASCULAR

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

95-0701: DILATOR SET,VASCULAR.

The DILATOR SET,VASCULAR is a the manufacturer industrial component. Key specifications include end_item_identification: USED ON KOPCO WASTE COMPACTOR MODEL 1800SS, part_name_assigned_by_controlling_agency: DILATOR SET VASCULAR SS MALLEABLE SHAFT 8.25"LG SURG PROCEDURES. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-942-5141, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
95-0701
NSN: 5305-00-942-5141
NIINs: 009425141, 014212973, 014578138
FSC: 5305 — Screws
CAGE: 06481 — NORTHROP GRUMMAN SYSTEMS CORPORATION DBA NORTHROP GRUMMAN SYSTEMS CORP (USA)
SPECIFICATIONS
end_item_identificationUSED ON KOPCO WASTE COMPACTOR MODEL 1800SS
part_name_assigned_by_controlling_agencyDILATOR SET VASCULAR SS MALLEABLE SHAFT 8.25"LG SURG PROCEDURES
NSN5305-00-942-5141
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 95-0701 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.050 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.038 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
THREAD DIRECTION: RIGHT-HAND
•
LOCKING FEATURE: STRIP THREADS
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.050 INCHES MINIMUM AND 0.051 INCHES MAXIMUM IN
HEAD HEIGHT0.038 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
FASTENER LENGTH0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
THREAD LENGTH0.172 INCHES MINIMUM AND 0.204 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.086 INCHES IN
THREAD DIRECTIONRIGHT-HAND
LOCKING FEATURESTRIP THREADS
SURFACE TREATMENTPASSIVATE OVERALL
INTERNAL DRIVE STYLEHEXAGON
THREAD CLASS3A A
SUBSTITUTES & CROSS-REFERENCES 2
LL57B26J3MReference document
Same NSN cross-reference
Reference document — Secondary reference
SNT50429-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 95-0701?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 95-0701?
95-0701 is a DILATOR SET,VASCULAR.
What parts can replace 95-0701?
There are 2 known substitutes for 95-0701: LL57B26J3M, SNT50429-6. Substitute compatibility should be verified for your specific system.
What is the NSN for 95-0701?
95-0701 is cataloged in the U.S. Government catalog under NSN 5305-00-942-5141. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 95-0701

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.