PartsTable
Technical Data Sheet
Download PDF

95-000-99 — PROGRAMMER MODULE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

95-000-99: PROGRAMMER MODULE.

The PROGRAMMER MODULE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 316 OR STEEL COMP 321 OR STEEL COMP 347 OVERALL, nut_style: HEXAGON, nut_height: 0.266 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNF, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-619-5887, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
95-000-99
NSN: 5310-00-619-5887
NIINs: 006195887, 011057791, 015487460
FSC: 5310 — Nuts and Washers
CAGE: 93835 — PARKER HANNIFIN CORPORATION DIV HYDRAULIC SYSTEMS DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 316 OR STEEL COMP 321 OR STEEL COMP 347 OVERALL
nut_styleHEXAGON
nut_height0.266 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNF
special_featuresLC CONNECTOR, 62.5UM MULTIMODE FIBER, CERAMIC FERRULE, SINGLE PACK, BEIGE HOUSING, BEIGE 900 UM, 2.0 MM AND 2.9 MM BOOTS MM
thread_directionRIGHT-HAND
countersink_angle109.5 DEGREES MINIMUM AND 110.5 DEGREES MAXIMUM NUT
surface_treatmentPASSIVATE OVERALL
width_across_flats0.863 INCHES MINIMUM AND 0.877 INCHES MAXIMUM IN
nominal_thread_size0.562 INCHES IN
bearing_surface_typeFLAT
NSN5310-00-619-5887
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 95-000-99 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.863 INCHES MINIMUM AND 0.877 INCHES MAXIMUM IN
•
BEARING SURFACE FINISH: 125.0 MICROINCHES
•
THREAD SERIES: UNF
•
HOLE CONFIGURATION STYLE: CONFIGURATION B
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE OR ASTM A582 ASSN STD 3RD MATERIAL RESPONSE OR QQ-S-763 FED SPEC 4TH MATERIAL RESPONSE OR QQ-S-763 FED SPEC 5TH MATERIAL RESPONSE OR QQ-S-763 FED SPEC 6TH MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.562 INCHES IN
•
NUT HEIGHT: 0.266 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.863 INCHES MINIMUM AND 0.877 INCHES MAXIMUM IN
BEARING SURFACE FINISH125.0 MICROINCHES
THREAD SERIESUNF
HOLE CONFIGURATION STYLECONFIGURATION B
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE OR ASTM A582 ASSN STD 3RD MATERIAL RESPONSE OR QQ-S-763 FED SPEC 4TH MATERIAL RESPONSE OR QQ-S-763 FED SPEC 5TH MATERIAL RESPONSE OR QQ-S-763 FED SPEC 6TH MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.562 INCHES IN
NUT HEIGHT0.266 INCHES MINIMUM AND 0.297 INCHES MAXIMUM IN
DRILLED HOLE DIAMETER0.062 INCHES NOMINAL IN
SURFACE TREATMENTPASSIVATE OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 95-000-99?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 95-000-99?
95-000-99 is a PROGRAMMER MODULE.
What is the NSN for 95-000-99?
95-000-99 is cataloged in the U.S. Government catalog under NSN 5310-00-619-5887. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 95-000-99

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.