PartsTable
Technical Data Sheet
Download PDF

94X0215 — SEAL,PLAIN ENCASED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

94X0215: SEAL,PLAIN ENCASED.

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: RECESSED, seal_width: 0.313 INCHES NOMINAL IN, housing_bore_diameter: 1.500 INCHES NOMINAL IN, sealing_element_style: VERTICAL, maximum_pressure_rating: 7.0 POUNDS PER SQUARE INCH (PSI) LBS. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-962-4495, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
94X0215
NSN: 5330-00-962-4495
NIINs: 009624495, 010718787
FSC: 5330 — Packing and Gasket Materials
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL CASE
case_styleRECESSED
seal_width0.313 INCHES NOMINAL IN
housing_bore_diameter1.500 INCHES NOMINAL IN
sealing_element_styleVERTICAL
maximum_pressure_rating7.0 POUNDS PER SQUARE INCH (PSI) LBS
accommodated_shaft_diameter0.875 INCHES NOMINAL IN
accommodated_shaft_maximum_rated_speed3000 FEET PER MINUTE FT
NSN5330-00-962-4495
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 94X0215 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL WIDTH: 0.312 INCHES NOMINAL IN
•
HOUSING BORE DIAMETER: 1.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SINGLE LIP
•
ACCOMMODATED SHAFT DIAMETER: 0.875 INCHES NOMINAL IN
•
MATERIAL: STEEL INTERNALLY MOLDED-IN REINFORCEMENT
•
CONSTRUCTION: SOLID
TECHNICAL CHARACTERISTICS
SEAL WIDTH0.312 INCHES NOMINAL IN
HOUSING BORE DIAMETER1.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESINGLE LIP
ACCOMMODATED SHAFT DIAMETER0.875 INCHES NOMINAL IN
MATERIALSTEEL INTERNALLY MOLDED-IN REINFORCEMENT
MATERIALSTEEL SPRING
CONSTRUCTIONSOLID
SUBSTITUTES & CROSS-REFERENCES 3
PA6566Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
M340249R91Reference document
Same NSN cross-reference
Reference document — Secondary reference
D312454-47Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 94X0215?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 94X0215?
94X0215 is a SEAL,PLAIN ENCASED.
What parts can replace 94X0215?
There are 3 known substitutes for 94X0215: PA6566, M340249R91, D312454-47. Substitute compatibility should be verified for your specific system.
What is the NSN for 94X0215?
94X0215 is cataloged in the U.S. Government catalog under NSN 5330-00-962-4495. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 94X0215

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.