PartsTable
Technical Data Sheet
Download PDF

94945A218 — NUT,SELF-LOCKING,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

94945A218: NUT,SELF-LOCKING,HEXAGON.

The NUT,SELF-LOCKING,HEXAGON is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q LOCKING INSERT, nut_style: HEXAGON, nut_height: 0.270 INCHES NOMINAL IN, nut_length: 0.560 INCHES NOMINAL IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC). This part is cataloged in the U.S.

Government catalog under NSN 5310-01-695-4968, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
94945A218
NSN: 5310-01-695-4968
FSC: 5310 — Nuts and Washers
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q LOCKING INSERT
nut_styleHEXAGON
nut_height0.270 INCHES NOMINAL IN
nut_length0.560 INCHES NOMINAL IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
locking_featureNYLON INSERT
thread_directionRIGHT-HAND
surface_treatmentZINC NUT
width_across_flats0.562 INCHES NOMINAL IN
nominal_thread_size0.375 INCHES IN
bearing_surface_typeCHAMFERED
NSN5310-01-695-4968
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 94945A218 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.562 INCHES NOMINAL IN
•
NUT LENGTH: 0.560 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
LOCKING FEATURE: NYLON INSERT
•
NUT HEIGHT: 0.270 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC NUT
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.562 INCHES NOMINAL IN
NUT LENGTH0.560 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
LOCKING FEATURENYLON INSERT
NUT HEIGHT0.270 INCHES NOMINAL IN
SURFACE TREATMENTZINC NUT
PART NAME ASSIGNED BY CONTROLLING AGENCYTHIN NYLON LOCKNUT
NUT STYLEHEXAGON
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 1
1109200174Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 94945A218?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 94945A218?
94945A218 is a NUT,SELF-LOCKING,HEXAGON.
What parts can replace 94945A218?
There is 1 known substitute for 94945A218: 1109200174. Substitute compatibility should be verified for your specific system.
What is the NSN for 94945A218?
94945A218 is cataloged in the U.S. Government catalog under NSN 5310-01-695-4968. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 94945A218

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.