PartsTable
Technical Data Sheet
Download PDF

948803 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

948803: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.047 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN, diameter: 0.308 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN, material: STEEL COMP 301 OVERALL, head_style: FLAT CHAMFER, chamfer_length: 0.062 INCHES NOMINAL IN, style_designator: STRAIGHT. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-935-9084, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
948803
NSN: 5315-00-935-9084
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 34623 — AM GENERAL LLC (USA)
SPECIFICATIONS
height0.047 INCHES MINIMUM AND 0.048 INCHES MAXIMUM IN
diameter0.308 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
materialSTEEL COMP 301 OVERALL
head_styleFLAT CHAMFER
chamfer_length0.062 INCHES NOMINAL IN
style_designatorSTRAIGHT
pin_chamfer_angle15.0 DEGREES NOMINAL
pin_head_diameter0.438 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
under_head_length2.219 INCHES NOMINAL IN
first_hole_diameter0.219 INCHES NOMINAL IN
hole_arrangement_styleONE END DRILLED
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5315-00-935-9084
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 948803 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CHAMFER LENGTH: 0.062 INCHES NOMINAL IN
•
HOLE ARRANGEMENT STYLE: ONE END DRILLED
•
UNDER HEAD LENGTH: 2.219 INCHES NOMINAL IN
•
PIN CHAMFER ANGLE: 15.0 DEGREES NOMINAL
•
FIRST HOLE DIAMETER: 0.219 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT
•
PIN HEAD DIAMETER: 0.438 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
CHAMFER LENGTH0.062 INCHES NOMINAL IN
HOLE ARRANGEMENT STYLEONE END DRILLED
UNDER HEAD LENGTH2.219 INCHES NOMINAL IN
PIN CHAMFER ANGLE15.0 DEGREES NOMINAL
FIRST HOLE DIAMETER0.219 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT
PIN HEAD DIAMETER0.438 INCHES MINIMUM AND 0.469 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
DIAMETER0.308 INCHES MINIMUM AND 0.311 INCHES MAXIMUM IN
HEAD STYLEFLAT CHAMFER
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
7745632Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 948803?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 948803?
948803 is a PIN,STRAIGHT,HEADED.
What parts can replace 948803?
There is 1 known substitute for 948803: 7745632. Substitute compatibility should be verified for your specific system.
What is the NSN for 948803?
948803 is cataloged in the U.S. Government catalog under NSN 5315-00-935-9084. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 948803

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.