PartsTable
Technical Data Sheet
Download PDF

94855A232 — NUT,PLAIN,SQUARE

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

94855A232: NUT,PLAIN,SQUARE.

The NUT,PLAIN,SQUARE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: SQUARE, nut_height: 0.125 INCHES NOMINAL IN, thread_series: UNIFIED NATIONAL COARSE (UNC), hardness_rating: 44.0 ROCKWELL C MAXIMUM, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-574-4529, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
94855A232
NSN: 5310-01-574-4529
FSC: 5310 — Nuts and Washers
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleSQUARE
nut_height0.125 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)
hardness_rating44.0 ROCKWELL C MAXIMUM
thread_directionRIGHT-HAND
surface_treatmentZINC OVERALL
width_across_flats0.375 INCHES NOMINAL IN
nominal_thread_size10.0 MILLIMETERS MM
bearing_surface_typeFLAT
end_item_identification4520-01-566-6669, HEATER,WATER 400,00
thread_quantity_per_inch24
NSN5310-01-574-4529
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 94855A232 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.375 INCHES NOMINAL IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
HARDNESS RATING: 44.0 ROCKWELL C MAXIMUM
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 10.0 MILLIMETERS MM
•
NUT HEIGHT: 0.125 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC OVERALL
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.375 INCHES NOMINAL IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
HARDNESS RATING44.0 ROCKWELL C MAXIMUM
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE10.0 MILLIMETERS MM
NUT HEIGHT0.125 INCHES NOMINAL IN
SURFACE TREATMENTZINC OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCYFLAT TOP SQUARE NUT
NUT STYLESQUARE
END ITEM IDENTIFICATION4520-01-566-6669, HEATER,WATER 400,00
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 94855A232?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 94855A232?
94855A232 is a NUT,PLAIN,SQUARE.
What is the NSN for 94855A232?
94855A232 is cataloged in the U.S. Government catalog under NSN 5310-01-574-4529. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 94855A232

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.