PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 94717105
94717105 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,ROLLER,NEEDLE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.3750 INCHES NOMINAL IN, overall_width: 0.3125 INCHES NOMINAL IN, alignment_type: RIGID, surface_finish: GROUND, special_features: PRESSED STEEL RETAINER. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-151-4818, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
94717105
NSN: 3110-00-151-4818
FSC: 3110
CAGE: 31917 — COMPUTER PERIPHERALS INC ROCHESTER DIV SUB OF CONTROL DATA CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.3750 INCHES NOMINAL IN
overall_width0.3125 INCHES NOMINAL IN
alignment_typeRIGID
surface_finishGROUND
special_featuresPRESSED STEEL RETAINER
style_designatorNON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
lubrication_materialLUBRICANT
overall_outside_diameter0.5625 INCHES NOMINAL IN
standard_tolerance_designationAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
NSN3110-00-151-4818
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 94717105 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: NON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
•
MATERIAL: STEEL OVERALL
•
SURFACE FINISH: GROUND
•
ALIGNMENT TYPE: RIGID
•
LUBRICATION MATERIAL: LUBRICANT
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESPRESSED STEEL RETAINER
STYLE DESIGNATORNON-SEPARABLE, WITH ROLLER RETAINER, OPEN END, DRAWN SHELL
MATERIALSTEEL OVERALL
SURFACE FINISHGROUND
OVERALL WIDTH0.3125 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
LUBRICATION MATERIALLUBRICANT
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR INDUSTRIAL NEEDLE BEARINGS
BORE DIAMETER0.3750 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER0.5625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
517727-1Interchangeable
interchangeable cross-reference
interchangeable
842944-4Interchangeable
interchangeable cross-reference
interchangeable
9703-6Interchangeable
interchangeable cross-reference
interchangeable
500-504Interchangeable
interchangeable cross-reference
interchangeable
00504Interchangeable
interchangeable cross-reference
interchangeable
92346-02Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 94717105?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 94717105?
94717105 is a BEARING,ROLLER,NEEDLE.
What parts can replace 94717105?
There are 18 known substitutes for 94717105: 517727-1, 842944-4, 9703-6 and 15 more. Substitute compatibility should be verified for your specific system.
Is 94717105 still available?
94717105 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 94717105

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026