PartsTable / O-RING / 9469127903
9469127903
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.418 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN, center_hole_diameter: 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-165-1972, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
9469127903
NSN: 5331-00-165-1972 FSC: 5331 — O-RINGCAGE: S4080 — PILATUS AIRCRAFT LTD (CHE)
SPECIFICATIONS
material RUBBER FLUOROCARBON CLASS FPM hardness_rating 75.0 SHORE DUROMETER A NOMINAL outside_diameter 0.418 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN center_hole_diameter 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN elongation_percentage 125 MAXIMUM cross-sectional_height 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN NSN 5331-00-165-1972
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 9469127903
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL: RUBBER FLUOROCARBON CLASS FPM
• CROSS-SECTIONAL HEIGHT: 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN
• CENTER HOLE DIAMETER: 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
• HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
• ELONGATION PERCENTAGE: 125 MAXIMUM
• OUTSIDE DIAMETER: 0.418 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL RUBBER FLUOROCARBON CLASS FPM CROSS-SECTIONAL HEIGHT 0.061 INCHES MINIMUM AND 0.067 INCHES MAXIMUM IN CENTER HOLE DIAMETER 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN HARDNESS RATING 75.0 SHORE DUROMETER A NOMINAL ELONGATION PERCENTAGE 125 MAXIMUM OUTSIDE DIAMETER 0.418 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
30116 Interchangeable interchangeable cross-reference
interchangeable
CW30125 Interchangeable interchangeable cross-reference
interchangeable
G100 Interchangeable interchangeable cross-reference
interchangeable
28G4962C2 Interchangeable interchangeable cross-reference
interchangeable
347/22125 Interchangeable interchangeable cross-reference
interchangeable
R149P903J Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 9469127903?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9469127903?
9469127903 is a O-RING.
What parts can replace 9469127903?
There are 24 known substitutes for 9469127903: 30116, CW30125, G100 and 21 more. Substitute compatibility should be verified for your specific system.
Is 9469127903 still available?
9469127903 is currently cancelled.
Request a Quote — 9469127903