PartsTable
Technical Data Sheet
9464K271 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include color: BLACK, material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: 0.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.441 INCHES NOMINAL IN, center_hole_diameter: 1.301 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-646-1080, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9464K271
NSN: 5331-01-646-1080
FSC: 5331 — O-RING
CAGE: 39428 — MCMASTER-CARR SUPPLY CO (USA)
SPECIFICATIONS
colorBLACK
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating0.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter1.441 INCHES NOMINAL IN
center_hole_diameter1.301 INCHES NOMINAL IN
cross-sectional_height0.070 INCHES NOMINAL IN
end_item_identificationF-15SA
part_name_assigned_by_controlling_agencyO-RING
NSN5331-01-646-1080
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9464K271 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
CENTER HOLE DIAMETER: 1.301 INCHES NOMINAL IN
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER: 1.441 INCHES NOMINAL IN
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TEMP RATING: 0.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT: 0.070 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER1.301 INCHES NOMINAL IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
END ITEM IDENTIFICATIONF-15SA
OUTSIDE DIAMETER1.441 INCHES NOMINAL IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
TEMP RATING0.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.070 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYO-RING
COLORBLACK
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
AS568-027Interchangeable
interchangeable cross-reference
interchangeable
AMS7271Interchangeable
interchangeable cross-reference
interchangeable
AMS3209Interchangeable
interchangeable cross-reference
interchangeable
2-27C557-7Interchangeable
interchangeable cross-reference
interchangeable
M22050-1-027Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-22050Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9464K271?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9464K271?
9464K271 is a O-RING.
What parts can replace 9464K271?
There are 9 known substitutes for 9464K271: AS568-027, AMS7271, AMS3209 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9464K271?
9464K271 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-646-1080. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9464K271