PartsTable
Technical Data Sheet
94456 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The COIL,RADIO FREQUENCY is a the manufacturer industrial component. Key specifications include swivel: NOT INCLUDED, armrest: NOT INCLUDED, backrest: INCLUDED, material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, seat_type: COVERED, body_width: 0.197 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-623-0000, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
94456
NSN: 5331-00-623-0000
FSC: 5331 — O-RING
CAGE: 16662 — LIFT PARTS MFG CO INC DIV OF ECHLIN MFG CO THE (USA)
SPECIFICATIONS
swivelNOT INCLUDED
armrestNOT INCLUDED
backrestINCLUDED
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
seat_typeCOVERED
body_width0.197 INCHES MAXIMUM IN
body_height0.390 INCHES MAXIMUM IN
body_length0.390 INCHES MAXIMUM IN
design_typeFULL
foldabilityNONFOLDABLE
temp_rating-60.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
adjustabilityADJUSTABLE
NSN5331-00-623-0000
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 94456 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER: 0.928 INCHES MINIMUM AND 0.958 INCHES MAXIMUM IN
ELONGATION PERCENTAGE: 338 MAXIMUM
CENTER HOLE DIAMETER: 0.728 INCHES MINIMUM AND 0.746 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT: 0.070 INCHES NOMINAL IN
TEMP RATING: -60.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER0.928 INCHES MINIMUM AND 0.958 INCHES MAXIMUM IN
ELONGATION PERCENTAGE338 MAXIMUM
CENTER HOLE DIAMETER0.728 INCHES MINIMUM AND 0.746 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.070 INCHES NOMINAL IN
TEMP RATING-60.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
44556Interchangeable
interchangeable cross-reference
interchangeable
FFB571ATYPEB1CLASSCInterchangeable
interchangeable cross-reference
interchangeable
60-8-36Interchangeable
interchangeable cross-reference
interchangeable
FFB571ANDTYPEB2ANDCLASSCInterchangeable
interchangeable cross-reference
interchangeable
855-3/4X3/4X5IN.Interchangeable
interchangeable cross-reference
interchangeable
3505-0750Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 94456?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 94456?
94456 is a COIL,RADIO FREQUENCY.
What parts can replace 94456?
There are 31 known substitutes for 94456: 44556, FFB571ATYPEB1CLASSC, 60-8-36 and 28 more. Substitute compatibility should be verified for your specific system.
Is 94456 still available?
94456 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 94456