PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 943711
943711 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET AND SHIM SET is a the manufacturer industrial component. Key specifications include document_type: ENGINEERING DRAWING, end_item_name: TRANSFER ASSEMBLY, document_source: 65909, end_item_source: 19207, component_quantity: 30, document_identification: DWG NO. 943711.

This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-933-3724, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
943711
NSN: 5330-00-933-3724
FSC: 5330
CAGE: 22852 — SPALLA INC (USA)
SPECIFICATIONS
document_typeENGINEERING DRAWING
end_item_nameTRANSFER ASSEMBLY
document_source65909
end_item_source19207
component_quantity30
document_identificationDWG NO. 943711
end_item_identification2520-917-0837
component_document_originINDUSTRIAL
NSN5330-00-933-3724
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 943711 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
END ITEM NAME: TRANSFER ASSEMBLY
•
END ITEM SOURCE: 19207
•
DOCUMENT TYPE: ENGINEERING DRAWING
•
DOCUMENT IDENTIFICATION: DWG NO. 943711
•
DOCUMENT SOURCE: 65909
•
COMPONENT DOCUMENT ORIGIN: INDUSTRIAL
•
COMPONENT QUANTITY: 30
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM NAMETRANSFER ASSEMBLY
END ITEM SOURCE19207
DOCUMENT TYPEENGINEERING DRAWING
DOCUMENT IDENTIFICATIONDWG NO. 943711
DOCUMENT SOURCE65909
COMPONENT DOCUMENT ORIGININDUSTRIAL
COMPONENT QUANTITY30
END ITEM IDENTIFICATION2520-917-0837
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
AS6136Interchangeable
interchangeable cross-reference
interchangeable
ANWWC561TYPEII0-5270DInterchangeable
interchangeable cross-reference
interchangeable
MILC6136TYPE2Interchangeable
interchangeable cross-reference
interchangeable
5704435Interchangeable
interchangeable cross-reference
interchangeable
97346Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 943711?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 943711?
943711 is a GASKET AND SHIM SET.
What parts can replace 943711?
There are 5 known substitutes for 943711: AS6136, ANWWC561TYPEII0-5270D, MILC6136TYPE2 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 943711?
943711 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-933-3724. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 943711

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026