PartsTable
Technical Data Sheet
Download PDF

94318 — BEARING,WASHER,THRUST

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

94318: BEARING,WASHER,THRUST.

The BEARING,WASHER,THRUST is a the manufacturer industrial component. Key specifications include diameter: 2.7510 INCHES MINIMUM AND 2.7540 INCHES MAXIMUM IN, material: PLASTIC PHENOLIC AND COTTON OVERALL, corner_shape: SQUARE ALL CORNERS, flange_thickness: 0.1250 INCHES NOMINAL IN, outside_diameter: 4.5000 INCHES NOMINAL IN, special_features: 4 EQUALLY SPACED MOUNTING HOLES,0.3125 IN. DIA IN.

This part is cataloged in the U.S. Government catalog under NSN 3110-00-120-4179, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
94318
NSN: 3110-00-120-4179
NIINs: 001204179, 011387639
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 51588 — RBC BEARINGS INCORPORATED DIV WEST TRENTON DIVISION (USA)
SPECIFICATIONS
diameter2.7510 INCHES MINIMUM AND 2.7540 INCHES MAXIMUM IN
materialPLASTIC PHENOLIC AND COTTON OVERALL
corner_shapeSQUARE ALL CORNERS
flange_thickness0.1250 INCHES NOMINAL IN
outside_diameter4.5000 INCHES NOMINAL IN
special_features4 EQUALLY SPACED MOUNTING HOLES,0.3125 IN. DIA IN
style_designatorROUND
overall_thickness0.2500 INCHES NOMINAL IN
shank_outside_diameter2.9990 INCHES MINIMUM AND 3.0020 INCHES MAXIMUM IN
center_hole_shape_styleROUND
cross-sectional_shape_styleSHOULDERED
material_document_and_classificationMIL-P-15035,TYPE FBG MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN3110-00-120-4179
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 94318 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 1.2500 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL LENGTH1.1250 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER1.2500 INCHES NOMINAL IN
SPECIAL FEATURESROLLER TYPE: SOLID
SUBSTITUTES & CROSS-REFERENCES 5
DD5942Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
9B641Reference document
Same NSN cross-reference
Reference document — Secondary reference
143199Reference document
Same NSN cross-reference
Reference document — Secondary reference
J24-1636Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
9A641Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 94318?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 94318?
94318 is a BEARING,WASHER,THRUST.
What parts can replace 94318?
There are 5 known substitutes for 94318: DD5942, 9B641, 143199 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 94318?
94318 is cataloged in the U.S. Government catalog under NSN 3110-00-120-4179. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 94318