PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 9427105
9427105 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CONE AND ROLLERS,TAPERED ROLLER. Key specifications include material: STEEL OVERALL, cone_width: 1.4375 INCHES NOMINAL IN, bore_diameter: 4.2500 INCHES NOMINAL IN, style_designator: NORMAL ANGLE, cone_corner_radius: 0.3100 INCHES NOMINAL IN, standard_tolerance_designation: AFBMA CLASS 2. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-088-6037, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9427105
NSN: 3110-00-088-6037
FSC: 3110
CAGE: 24617 — GENERAL MOTORS CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width1.4375 INCHES NOMINAL IN
bore_diameter4.2500 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
cone_corner_radius0.3100 INCHES NOMINAL IN
standard_tolerance_designationAFBMA CLASS 2
NSN3110-00-088-6037
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 9427105 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 4.2500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
CONE CORNER RADIUS: 0.3100 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE WIDTH: 1.4375 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER4.2500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
CONE CORNER RADIUS0.3100 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE WIDTH1.4375 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
0224008-3Interchangeable
interchangeable cross-reference
interchangeable
56426Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 9427105?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9427105?
9427105 is a CONE AND ROLLERS,TAPERED ROLLER.
What parts can replace 9427105?
There are 2 known substitutes for 9427105: 0224008-3, 56426. Substitute compatibility should be verified for your specific system.
What is the NSN for 9427105?
9427105 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-088-6037. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9427105

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026