942421: WRENCH,BOX AND OPEN END,COMBINAT.
WRENCH,BOX AND OPEN END,COMBINAT. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hole_diameter: 0.136 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.090 INCHES NOMINAL IN, overall_length: 1.090 INCHES NOMINAL IN, hardness_rating: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL, style_designator: NON-CIRCULAR. This part is cataloged in the U.S.
Government catalog under NSN 5330-00-290-9845, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | RUBBER CHLOROPRENE CLASS CR OVERALL |
| hole_diameter | 0.136 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN |
| overall_width | 1.090 INCHES NOMINAL IN |
| overall_length | 1.090 INCHES NOMINAL IN |
| hardness_rating | 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL |
| style_designator | NON-CIRCULAR |
| aperture_diameter | 0.810 INCHES NOMINAL IN |
| bolt_hole_quantity | 4 |
| cross-sectional_thickness | 0.031 INCHES NOMINAL IN |
| cross-sectional_shape_style | SOLID SINGLE OR COMPOSITION |
| material_document_and_classification | MIL-STD-417 GRADE SC 515 MIL STD SINGLE MATERIAL RESPONSE OVERALL |
| outside_edge_to_bolt_hole_center_distance_along_width | 0.140 INCHES NOMINAL IN |
| NSN | 5330-00-290-9845 |
| CROSS-SECTIONAL THICKNESS | 0.031 INCHES NOMINAL IN |
| HARDNESS RATING | 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL |
| STYLE DESIGNATOR | NON-CIRCULAR |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-STD-417 GRADE SC 515 MIL STD SINGLE MATERIAL RESPONSE OVERALL |
| OVERALL LENGTH | 1.090 INCHES NOMINAL IN |
| CROSS-SECTIONAL SHAPE STYLE | SOLID SINGLE OR COMPOSITION |
| OVERALL WIDTH | 1.090 INCHES NOMINAL IN |
| APERTURE DIAMETER | 0.810 INCHES NOMINAL IN |
| BOLT HOLE QUANTITY | 4 |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 0.804 INCHES MINIMUM AND 0.820 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN |
No substitute or cross-reference records for this part.