PartsTable
Technical Data Sheet
Download PDF

9421B04 — CLIP,RETAINING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

9421B04: CLIP,RETAINING.

The CLIP,RETAINING is a the manufacturer industrial component. Key specifications include width: 0.564 INCHES MINIMUM AND 0.584 INCHES MAXIMUM IN, material: STEEL COMP 302, overall_height: 0.067 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN, stock_diameter: 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN, style_designator: PIN, surface_treatment: PASSIVATE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-279-9420, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
9421B04
NSN: 5340-00-279-9420
FSC: 5340 — Hardware, Commercial
CAGE: 72962 — HARVARD INDUSTRIES INC (USA)
SPECIFICATIONS
width0.564 INCHES MINIMUM AND 0.584 INCHES MAXIMUM IN
materialSTEEL COMP 302
overall_height0.067 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
stock_diameter0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
style_designatorPIN
surface_treatmentPASSIVATE
casehardening_indicatorNOT CASEHARDENED
material_document_and_classificationAMS 5688, COMP 302 ASSN STD SINGLE MATERIAL RESPONSE
NSN5340-00-279-9420
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 9421B04 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: PIN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5688, COMP 302 ASSN STD SINGLE MATERIAL RESPONSE
•
STOCK DIAMETER: 0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
SURFACE TREATMENT: PASSIVATE
•
WIDTH: 0.564 INCHES MINIMUM AND 0.584 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 302
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.067 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
STYLE DESIGNATORPIN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5688, COMP 302 ASSN STD SINGLE MATERIAL RESPONSE
STOCK DIAMETER0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM IN
CASEHARDENING INDICATORNOT CASEHARDENED
SURFACE TREATMENTPASSIVATE
WIDTH0.564 INCHES MINIMUM AND 0.584 INCHES MAXIMUM IN
MATERIALSTEEL COMP 302
SUBSTITUTES & CROSS-REFERENCES 5
K49300-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
10117307Reference document
Same NSN cross-reference
Reference document — Informative reference only
F49249-4WReference document
Same NSN cross-reference
Reference document — Secondary reference
NS202041-3-048Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
BC446-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy 9421B04?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 9421B04?
9421B04 is a CLIP,RETAINING.
What parts can replace 9421B04?
There are 5 known substitutes for 9421B04: K49300-4, 10117307, F49249-4W and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 9421B04?
9421B04 is cataloged in the U.S. Government catalog under NSN 5340-00-279-9420. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 9421B04